CARE AND CLEANING
Periodic cleaning and proper maintenance will ensure efficiency, top performance, and long life. We suggest the following:
•The interior may be cleaned with a mild detergent and warm water.
•Avoid the use of solvent cleaning agents or abrasives on the interior. These cleansers may transmit taste to the ice cubes and food, or damage or discolor the interior.
•The exterior may be cleaned with a mild detergent and warm water.
•The front grill should be kept free of dust and lint to permit free air flow to the condenser (see Figure
37). The condenser coil, located |
| |
behind the front grill, should be |
| |
cleaned three to four times each |
| |
year. Use a brush or vacuum |
| |
cleaner to remove dirt, lint and |
| |
other accumulations | from the | UL005A |
|
| |
condenser coil. |
| Figure 37 |
!CAUTION
The condenser fins are SHARP. DO NOT run hands over condenser fins.
The solenoid valve inlet screen must be cleaned at least once each year as follows:
1.Shut off the water at the water supply valve.
2.Remove the entire hose con- nector from the solenoid valve.
3.Use a tooth brush to clean sediment from the inlet screen
| (see Figure 38). DO NOT |
| remove the screen. |
| 4. Attach the hose connector to |
| the solenoid valve. Tighten con- |
| nector securely with a pliers. |
UL123 | Open the water supply valve |
Figure 38 | and check for leakage at the |
hose connector. |
25 