U-Line ICE-MAKER/REFRIGERATOR user manual Installation, Site Preparation

User’s Manual

!CAUTION

•Using a heater to speed up defrosting can cause per- sonal injury and damage to the inner lining. DO NOT use any type of electrical heater to defrost.

•Use only genuine U-Line replacement parts. Imitation parts can reduce ice rate, cause water to overflow from ice maker mold, damage the unit, and may void the war- ranty.

INSTALLATION

SITE PREPARATION

1.Position the unit on a flat, level surface, capable of supporting the entire weight of the unit. Remember that the unit will be signifi- cantly heavier once it is fully loaded.

2.Connect the unit to a grounded and polarized 115 VAC, 60Hz, 15A circuit (normal household current).

!WARNING

NEVER use an extension cord to connect power to the unit.

Electrical Grounding Required. This appliance is equipped with a three prong (grounding) polarized plug for your pro- tection against possible shock hazards.

!WARNING

•Never remove the round grounding prong from the plug.

•Never use a two-prong grounding adapter.

•Where a two-prong wall receptacle is encountered, con- tact a qualified electrician to have it replaced with a 3-prong receptacle in accordance with applicable electri- cal codes.

4