Adjusting ICE Cube Size

User’s Manual

On models equipped with an ice maker, the cube size may be adjusted by changing the amount of water injected into the ice maker assembly.

1.Remove the ice maker assembly cover (see Figure 35).

2.Locate the adjusting screw on the ice maker assembly control box. The adjusting screw is just below the minus (–) and plus (+) signs on the control box (see Figure 36).

– +

automatic ICE MAKER

UL133	UL122
Figure 35	Figure 36

3.Turn the adjusting screw toward the minus (–) sign (clockwise) for smaller cubes or toward the plus (+) sign (counterclockwise) for larger cubes.

4.Install the ice maker assembly cover.

Some units are not frost free and must be defrosted periodically. Refer to CARE AND CLEANING.

!WARNING

Use only genuine U-Line replacement parts. U-Line ice maker parts are not the same as standard FSP Whirlpool parts. Using non U-Line parts can reduce ice rate, cause water to overflow from ice maker mold, damage the unit, and may void the warranty.