U-Line ICE-MAKER/REFRIGERATOR user manual Connecting the Water Supply

User’s Manual

CONNECTING THE WATER SUPPLY

1.Install the 1/4 inch copper water line from the main water source. On ice maker models BI-95 and BI-98, the water line is inserted through the hole in the rear of the unit to connect to the solenoid valve in the front (see Figure 3).

POWER

CORD

3.Carefully bend the water sup- ply line into position and con- nect the line to the solenoid valve (see Figures 5 and 6). Avoid kinking the water sup- ply line.

WATER￿

CONNECTION

WATER LINE UL101

Figure 3

2.Locate the compression fit-

ting and ferrule packed in the			UL103
unit. Slide the	compression		Figure 5
fitting and ferrule over the
1/4 inch water supply line.
Do not use thread sealing
compound or	tape. Using
two wrenches,	tighten	the
compression fitting on		the
supply line (see Figure 4).

	WATER LINE
	UL104
	UL134
Figure 4	Figure 6

6