Smeg SE2642ID3 manual Residual heat indicator, Cooking zones, Control panel

Page 11

Instructions for the User

6.9 Residual heat indicator

The hob is equipped with a residual heat indicator in the form of the symbol.

When is displayed after the heat has been switched off, it indicates that the residual heat can be used to keep food hot or melt certain foods.

The cooking zone may still be hot even after the symbol is no longer displayed. Danger of burns! The glass ceramic surface does not heat up directly but is heated only indirectly by the bases of the saucepans.

6.10 Cooking zones

The appliance has 4 cooking zones of various power levels and diameters. Their position is clearly indicated with circles and the heat is limited to within the diameters traced on the glass.

The 4 cooking zones are of the HIGH-LIGHT type; they turn on after a few seconds and their heat level can be adjusted by means of the controls on the front panel from 1 (min.) to 9 (max.).

FRONT LEFT HOTPLATE

REAR RIGHT HOTPLATE

REAR LEFT HOTPLATE

FRONT RIGHT HOTPLATE

6.11 Control panel

All the appliance's control and monitoring devices are located together on the front panel. The symbols used are described in the table below.

REAR LEFT COOKING ZONE

REAR RIGHT COOKING ZONE

FRONT LEFT COOKING ZONE

FRONT RIGHT COOKING ZONE

INCREASE VALUE BUTTON

TIMER BUTTON

DECREASE VALUE BUTTON

HOB ON / OFF BUTTON

STOP BUTTON

POWER FUNCTION BUTTON

39

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Contents Plate Must not be Removed Instructions for USEInformation for Users Recycling Instructions OUR Environment PolicyAuthorised Technician or AT AN Authorised Service Centre Safety InstructionsPlease note Safety instructions Intended USE of the Appliance Before First USESaucepan recognition HobSaucepans suitable for use in induction cooking Limitation on the duration of useOther functions Protection from overheating inductionPower levels Advice on energy-savingControl panel Residual heat indicatorCooking zones Cooking zone selector button Using the SensorsAbsorbed Power Power Function Using the HOBOperating power settings MAX Absorbed PowerStop function Switching on the hob and the cooking zoneSwitching off the cooking zone Switching off the hobActivating the child lock Automatic switch-off timerQuick start cooking Timer clockPower function cooking zone with P Plate warmer function where applicableCooking guidelines Power managementSetting Type of Food Never Steam Clean the Appliance Cleaning and MaintenanceCleaning the glass ceramic hob Weekly cleaningProblem Possible Causes Solution TROUBLE-SHOOTINGInstructions for the User Positioning InstallationSafety instructions for installing kitchen furniture VentilationSection cut from the work surface Hob sealInserting the hob into the hole in the work surface Positioning the fastening clipsHOB Rating Technical informationRating plate Electrical connectionInstructions for the installer
Top Page Image Contents