Smeg SE2642ID3 manual Using the Sensors, Cooking zone selector button

Page 12

Instructions for the User

7. USING THE SENSORS

The glass ceramic hob is controlled by means of the Touch Control sensor buttons. Operating the sensor buttons: lightly touch a symbol on the glass ceramic surface. The buzzer will sound to confirm every effective touch. For simplicity, from now on we will refer to the Touch Control sensor buttons simply as the «button».

On/off button

Use this to turn the hob on and off. In effect, this button is the main switch.

Cooking zone selector button

By activating one of the available selectors you select a cooking zone, the power level of which can then be adjusted using the “” button or the “” button.

Minus button / Plus button

These two buttons enable the power level, automatic switch-off and timer to be adjusted and set. Decrease values using the “” button (minus), increase them using the “” button (plus). The “” and “” buttons can be activated with a single touch or held down (again individually) for a period (to modify the value quickly). The indicated value can be cancelled by pressing both buttons simultaneously.

Power level indicator

This indicator shows the level selected, i.e.:

= the residual heat

= the Power function

= saucepan recognition

= rapid start cooking

= the Stop function

= Child lock

= Plate warmer function (where applicable)

STOP button

The cooking process can be briefly paused using the STOP function.

Timer selector

For programming the automatic switch-off or timer.

40

Image 12

Contents Contents Instructions for USE Plate Must not be RemovedRecycling Instructions OUR Environment Policy Information for UsersSafety Instructions Authorised Technician or AT AN Authorised Service CentrePlease note Safety instructions Before First USE Intended USE of the ApplianceHob Saucepan recognitionLimitation on the duration of use Other functionsProtection from overheating induction Saucepans suitable for use in induction cookingAdvice on energy-saving Power levelsResidual heat indicator Cooking zonesControl panel Using the Sensors Cooking zone selector buttonUsing the HOB Operating power settingsMAX Absorbed Power Absorbed Power Power FunctionSwitching on the hob and the cooking zone Switching off the cooking zoneSwitching off the hob Stop functionAutomatic switch-off timer Activating the child lockTimer clock Quick start cookingPlate warmer function where applicable Power function cooking zone with PPower management Setting Type of FoodCooking guidelines Cleaning and Maintenance Cleaning the glass ceramic hobWeekly cleaning Never Steam Clean the ApplianceTROUBLE-SHOOTING Problem Possible Causes SolutionInstructions for the User Installation Safety instructions for installing kitchen furnitureVentilation PositioningHob seal Section cut from the work surfacePositioning the fastening clips Inserting the hob into the hole in the work surfaceTechnical information Rating plateElectrical connection HOB RatingInstructions for the installer