Smeg SE2642ID3 manual Using the HOB, Operating power settings, Zone Number Zone Diameter

Page 13

Instructions for the User

8. USING THE HOB

8.1 Warnings and general advice

To operate a hob equipped with touch controls, lightly press the symbols printed on the surface of the hob.

Every pressure on a symbol is confirmed by a control beep.

On first connection to the electrical mains, an operating check will be carried out automatically and all the indicator lights will come on for a few seconds.

8.2 Operating power settings

Below, we provide a table with the maximum power consumptions of the cooking zones that are in operation.

ZONE

NUMBER

ZONE DIAMETER

180mm

210mm

MAX ABSORBED POWER

1850 W

2300 W

ABSORBED POWER IN

POWER FUNCTION

2500 W

3200 W

145 mm

1400 W

1800 W

260 mm

2400 W

3200 W

41

Image 13

Contents Contents Plate Must not be Removed Instructions for USEInformation for Users Recycling Instructions OUR Environment PolicyAuthorised Technician or AT AN Authorised Service Centre Safety InstructionsPlease note Safety instructions Intended USE of the Appliance Before First USESaucepan recognition HobOther functions Limitation on the duration of useProtection from overheating induction Saucepans suitable for use in induction cookingPower levels Advice on energy-savingCooking zones Residual heat indicatorControl panel Cooking zone selector button Using the SensorsOperating power settings Using the HOBMAX Absorbed Power Absorbed Power Power FunctionSwitching off the cooking zone Switching on the hob and the cooking zoneSwitching off the hob Stop functionActivating the child lock Automatic switch-off timerQuick start cooking Timer clockPower function cooking zone with P Plate warmer function where applicableSetting Type of Food Power managementCooking guidelines Cleaning the glass ceramic hob Cleaning and MaintenanceWeekly cleaning Never Steam Clean the ApplianceProblem Possible Causes Solution TROUBLE-SHOOTINGInstructions for the User Safety instructions for installing kitchen furniture InstallationVentilation PositioningSection cut from the work surface Hob sealInserting the hob into the hole in the work surface Positioning the fastening clipsRating plate Technical informationElectrical connection HOB RatingInstructions for the installer