Smeg SE2642ID3 manual Instructions for USE, Plate Must not be Removed

Page 2

Precautions for use

1. INSTRUCTIONS FOR USE

ELECTRICAL CONNECTION: CONSULT THE INSTALLATION INSTRUCTIONS FOR THE SAFETY STANDARDS FOR ELECTRICAL APPLIANCES AND FOR THE VENTILATION FUNCTIONS.

IN YOUR OWN INTEREST, AND THAT OF SAFETY, THE LAW ESTABLISHES THAT ALL ELECTRICAL APPLIANCES BE INSTALLED AND SERVICED BY QUALIFIED PERSONNEL, IN ACCORDANCE WITH THE REGULATIONS IN FORCE.

OUR APPROVED INSTALLERS GUARANTEE A SATISFACTORY JOB.

ELECTRICAL APPLIANCES MUST ALWAYS BE UNINSTALLED BY COMPETENT PERSONS.

THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE. IT MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE HOB. WE ADVISE YOU TO READ THIS MANUAL AND ALL THE INFORMATION IT CONTAINS CAREFULLY BEFORE USING THE HOB. INSTALLATION MUST BE CARRIED OUT BY QUALIFIED PERSONNEL IN ACCORDANCE WITH THE REGULATIONS IN FORCE. THIS APPLIANCE IS INTENDED FOR DOMESTIC USE AND CONFORMS TO THE EEC DIRECTIVES CURRENTLY IN FORCE. THE APPLIANCE HAS BEEN BUILT TO CARRY OUT THE FOLLOWING FUNCTIONS: COOKING AND HEATING OF FOOD; ALL OTHER USES ARE CONSIDERED UNSUITABLE.

THE MANUFACTURER CANNOT BE HELD LIABLE FOR USE OF THE HOB OTHER THAN AS INDICATED.

DO NOT DISCARD PACKAGING IN THE HOME ENVIRONMENT. SEPARATE THE VARIOUS WASTE MATERIALS AND TAKE THEM TO THE NEAREST DIFFERENTIATED WASTE COLLECTION CENTRE.

THIS APPLIANCE IS MARKED ACCORDING TO THE EUROPEAN DIRECTIVE 2002/96/EC ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE).

THIS DIRECTIVE DETERMINES THE STANDARDS FOR THE COLLECTION AND RECYCLING OF WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT APPLICABLE THROUGHOUT THE EUROPEAN UNION.

DO NOT OBSTRUCT VENTILATION OPENINGS AND HEAT DISPERSAL SLITS.

DO NOT USE THIS APPLIANCE FOR HEATING ROOMS.

THE IDENTIFICATION PLATE CONTAINING THE TECHNICAL DATA, SERIAL NUMBER AND BRAND NAME IS IN A VISIBLE POSITION UNDER THE CASING. A COPY OF THE IDENTIFICATION PLATE IS INCLUDED IN THE BOOKLET. YOU ARE ADVISED TO ATTACH IT IN THE SPACE PROVIDED ON THE INSIDE COVER.

THE PLATE MUST NOT BE REMOVED.

TAKE CARE NOT TO SPILL SUGAR OR SWEET MIXTURES ON THE HOB WHILE COOKING OR TO PLACE MATERIALS OR SUBSTANCES WHICH COULD MELT ON IT (PLASTIC OR TINFOIL). IF THIS HAPPENS, TO AVOID DAMAGE TO THE SURFACE, TURN OFF THE HEAT IMMEDIATELY AND CLEAN THE SURFACE WITH THE SCRAPER PROVIDED WHILE THE PLATE IS STILL WARM. IF THE GLASS CERAMIC

HOB IS NOT CLEANED IMMEDIATELY, THERE IS A RISK THAT INCRUSTATIONS WILL BE LEFT THAT ARE IMPOSSIBLE TO REMOVE ONCE THE HOB HAS COOLED.

DO NOT USE METALLIC SPONGES OR SHARP SCRAPERS AS THEY WILL DAMAGE THE SURFACE.

The manufacturer cannot be held liable for damage to persons or things caused by failure to observe the above instructions, by interference with any part of the appliance or by the use of non-original spare parts.

30

Image 2
Contents Contents Instructions for USE Plate Must not be RemovedRecycling Instructions OUR Environment Policy Information for UsersSafety Instructions Authorised Technician or AT AN Authorised Service CentrePlease note Safety instructions Before First USE Intended USE of the ApplianceHob Saucepan recognitionProtection from overheating induction Limitation on the duration of useOther functions Saucepans suitable for use in induction cookingAdvice on energy-saving Power levelsControl panel Residual heat indicatorCooking zones Using the Sensors Cooking zone selector buttonMAX Absorbed Power Using the HOBOperating power settings Absorbed Power Power FunctionSwitching off the hob Switching on the hob and the cooking zoneSwitching off the cooking zone Stop functionAutomatic switch-off timer Activating the child lockTimer clock Quick start cookingPlate warmer function where applicable Power function cooking zone with PCooking guidelines Power managementSetting Type of Food Weekly cleaning Cleaning and MaintenanceCleaning the glass ceramic hob Never Steam Clean the ApplianceTROUBLE-SHOOTING Problem Possible Causes SolutionInstructions for the User Ventilation InstallationSafety instructions for installing kitchen furniture PositioningHob seal Section cut from the work surfacePositioning the fastening clips Inserting the hob into the hole in the work surfaceElectrical connection Technical informationRating plate HOB RatingInstructions for the installer