Smeg SE2642ID3 manual Instructions for the User

Page 21

Instructions for the User

The saucepans in use are	-	The noise is	due	to	technical
The saucepans in use are		reasons. There	is	no	danger to
making a noise.		reasons. There	is	no	danger to
making a noise.		the hob or the saucepan.
		the hob or the saucepan.

The cooling fan continues to	-	This is normal because the
function even after the hob has		electronics need to cool down.
been turned off.
Sounds can be heard as if	-	This is for technical reasons and
something was creaking or		cannot be avoided.
switching on.
					- If cracks or fissures form, or if the
					glass ceramic cooking surface
There are cracks or fissures in					breaks, turn off the appliance
the hob.					immediately. Disconnect the hob
					from the power supply and call
					Technical Support.

49

Image 21

Contents Contents Plate Must not be Removed Instructions for USEInformation for Users Recycling Instructions OUR Environment PolicyAuthorised Technician or AT AN Authorised Service Centre Safety InstructionsPlease note Safety instructions Intended USE of the Appliance Before First USESaucepan recognition HobOther functions Limitation on the duration of useProtection from overheating induction Saucepans suitable for use in induction cookingPower levels Advice on energy-savingResidual heat indicator Cooking zonesControl panel Cooking zone selector button Using the SensorsOperating power settings Using the HOBMAX Absorbed Power Absorbed Power Power FunctionSwitching off the cooking zone Switching on the hob and the cooking zoneSwitching off the hob Stop functionActivating the child lock Automatic switch-off timerQuick start cooking Timer clockPower function cooking zone with P Plate warmer function where applicablePower management Setting Type of FoodCooking guidelines Cleaning the glass ceramic hob Cleaning and MaintenanceWeekly cleaning Never Steam Clean the ApplianceProblem Possible Causes Solution TROUBLE-SHOOTINGInstructions for the User Safety instructions for installing kitchen furniture InstallationVentilation PositioningSection cut from the work surface Hob sealInserting the hob into the hole in the work surface Positioning the fastening clipsRating plate Technical informationElectrical connection HOB RatingInstructions for the installer