Smeg SE2642ID3 manual Instructions for the installer

Page 26

Instructions for the installer

1 - Operation at 380-415V2N˜:use a H05V2V2-F type four-core cable (4 x 2.5 mm2 cable);

2 - Operation at 220-240V˜:use a H05V2V2-F type three-core cable (3 x 4 mm2 cable);

The end to be connected to the appliance must have an earth wire (yellow-green) at least 20 mm longer than the others.

The manufacturer cannot be held liable for damage to persons or things caused by failure to observe the above instructions or by tampering with any part of the appliance.

Image 26

Contents Contents Instructions for USE Plate Must not be RemovedRecycling Instructions OUR Environment Policy Information for UsersSafety Instructions Authorised Technician or AT AN Authorised Service CentrePlease note Safety instructions Before First USE Intended USE of the ApplianceHob Saucepan recognitionProtection from overheating induction Limitation on the duration of useOther functions Saucepans suitable for use in induction cookingAdvice on energy-saving Power levelsControl panel Residual heat indicatorCooking zones Using the Sensors Cooking zone selector buttonMAX Absorbed Power Using the HOBOperating power settings Absorbed Power Power FunctionSwitching off the hob Switching on the hob and the cooking zoneSwitching off the cooking zone Stop functionAutomatic switch-off timer Activating the child lockTimer clock Quick start cookingPlate warmer function where applicable Power function cooking zone with PCooking guidelines Power managementSetting Type of Food Weekly cleaning Cleaning and MaintenanceCleaning the glass ceramic hob Never Steam Clean the ApplianceTROUBLE-SHOOTING Problem Possible Causes SolutionInstructions for the User Ventilation InstallationSafety instructions for installing kitchen furniture PositioningHob seal Section cut from the work surfacePositioning the fastening clips Inserting the hob into the hole in the work surfaceElectrical connection Technical informationRating plate HOB RatingInstructions for the installer