Instructions for the User
8.3 Switching on the hob and the cooking zone
To activate the control described here, after pressing one (selection) button, you need to press another one afterwards.
The second button needs to be pressed within 10 seconds, as otherwise the desired selection will be deactivated.
1Press the on/off button 
until the power level indicators show «0». The function lights will flash. The control is then ready for use.
2Then press a button to select the cooking zone (e.g. 
for the rear left zone). The function light for the selected cooking zone will come on.
3Select the cooking level using the 
button (plus) or the 
button (minus). By selecting the 
button, cooking level 1 is activated; by selecting the 
button, level 9 is activated.
4Place a metal saucepan on the cooking zone. Saucepan recognition will activate the induction coil. Until you place a metal saucepan on the cooking zone, the display will alternately show the cooking
level set and the 
symbol. For safety reasons, the cooking zone will be deactivated if a saucepan is not placed on it within 10 minutes. See “Saucepan recognition”.
To cook on other cooking zones at the same time, repeat the steps in points 2 to 4.
When applying radiant heat, the cooking utensils must not have magnetic properties (proceed as detailed in points 2 and 3).
8.4 Switching off the cooking zone
5The function light for the selected cooking zone must be lit. If necessary, activate the cooking zone selector.
6a) Press the 
button until cooking level "0" is shown, or:
b)Press the 
and 
buttons at the same time. The cooking zone can be switched off regardless of the power level setting, or:
c)Select the on/off button 
. The entire hob/all the cooking zones will turn off.
8.5 Switching off the hob
7 Press the on/off button 
. The hob will be completely deactivated regardless of the active settings.
8.6 STOP function
The cooking process can be paused briefly using the STOP function (e.g. to go and answer the telephone). To reinitiate the cooking process at the same power level, you need to deactivate the STOP function. If the timer was set, it stops and then restarts from the point where it stopped.
For safety reasons, this function is only available for 10 minutes, after which the hob turns off.
1.The cooking utensils are on the cooking zone and the desired power levels have been set.
2.Press the STOP button 
. The 
symbol is displayed instead of the selected power level.
3.The function is deactivated first of all by pressing the STOP button 
then another button of your choice (apart from the on/off button). The second button must be pressed within 10 seconds as otherwise the hob will turn off.
8.7 Child lock
This safety feature prevents the induction hob from being switched on accidentally or unsuitably by children. It locks the controls.
42