Smeg SE2642ID3 manual Positioning the fastening clips

Page 24

Instructions for the installer

11.6 Positioning the fastening clips

• Insert the fastening clips in each of the positions indicated by the arrows. The clips ensure that the hob will be fixed and centred as accurately as possible.

•To install the clips into the hob, all you have to do is insert them horizontally into the appropriate space by applying light pressure.

•Then turn them upwards to fix them in place.

11.7 Inserting the hob into the hole in the work surface

Be very careful when inserting the hob. If the process is not followed correctly as described, the hob may be damaged.

•Insert the hob, resting the frame completely on the back

edge of the hole in the work surface. Do not apply pressure to the frame as this part is very fragile and could be damaged.

• Then lower the front of the hob until it is fully inserted.

Image 24

Contents Contents Instructions for USE Plate Must not be RemovedRecycling Instructions OUR Environment Policy Information for UsersSafety Instructions Authorised Technician or AT AN Authorised Service CentrePlease note Safety instructions Before First USE Intended USE of the ApplianceHob Saucepan recognitionLimitation on the duration of use Other functionsProtection from overheating induction Saucepans suitable for use in induction cookingAdvice on energy-saving Power levelsResidual heat indicator Cooking zonesControl panel Using the Sensors Cooking zone selector buttonUsing the HOB Operating power settingsMAX Absorbed Power Absorbed Power Power FunctionSwitching on the hob and the cooking zone Switching off the cooking zoneSwitching off the hob Stop functionAutomatic switch-off timer Activating the child lockTimer clock Quick start cookingPlate warmer function where applicable Power function cooking zone with PPower management Setting Type of FoodCooking guidelines Cleaning and Maintenance Cleaning the glass ceramic hobWeekly cleaning Never Steam Clean the ApplianceTROUBLE-SHOOTING Problem Possible Causes SolutionInstructions for the User Installation Safety instructions for installing kitchen furnitureVentilation PositioningHob seal Section cut from the work surfacePositioning the fastening clips Inserting the hob into the hole in the work surfaceTechnical information Rating plateElectrical connection HOB RatingInstructions for the installer