Smeg B102MFX5 manual Adaptation to Different Types of GAS, Replacement of nozzles on the hob

Page 17

Instructions for the installer

14.ADAPTATION TO DIFFERENT TYPES OF GAS

Before performing any cleaning or maintenance work, disconnect the appliance from the mains.

The cooker hob is preset for natural gas G20 (2H) at a pressure of 20 mbar. In the case of operation with other types of gas the burner nozzles must be changed and the minimum flame adjusted on the gas taps. To change the nozzles, proceed as described below.

14.1 Replacement of nozzles on the hob

1Extract the grids and remove all the caps and flame-spreader crowns;

2Unscrew the burner nozzles with a 7 mm socket wrench;

3Replace the nozzles according to the type of gas to be used and the description in paragraph "14.2 Burner and nozzle characteristics table ";

4Replace the burners in the correct position.

Image 17

Contents Contents Plate Must not be Removed Instructions for Proper USEDisposal Instructions OUR Environment Policy Intended USE of the Appliance Safety PrecautionNever Attempt to Repair the Appliance WAY of ChildrenBefore First USE Know Your CookerUSE of the HOB Practical advice for using the hob burnersLighting of the hob burners Diameter of the vessels to be used on each burnerMain Oven Thermostat Knob HOB Burner Command KnobFront Control Panel Auxiliary Oven Thermostat Knob Main Oven Control KnobUSE of the Ovens How to use the grillCooling system Use of the electric grill in the large ovenStorage compartment Electronic Programmer Clock adjustmentSemiautomatic cooking Automatic cookingSwitching off the alarm Adjusting alarm volumeCancellation of set data End of cookingCleaning stainless steel Cleaning and MaintenanceOrdinary daily cleaning Cleaning of the hob componentsDoor glass Cleaning of ovenReplacement of light bulb Extraordinary MaintenanceLubrication of the taps Removing the doorElectrical connection Installation of the ApplianceVentilation requirements Connecting to natural and LPG gasAdaptation to Different Types of GAS Replacement of nozzles on the hobArrangement of the burners on the hob Burner and nozzle characteristics tableFinal Operations Mounting the rear top upstand where applicableRegulation of the hob burner minimum level for natural gas Regulation of the hob burner minimum level for LPGPositioning and levelling of the appliance