Smeg XXSC111P Programmed cooking procedures, Timed cooking with timer, Modifying the data set

Page 10

Instructions for the User

7.5Programmed cooking procedures

7.5.1 Timed cooking with timer

From ON status (see point «7.2 Operating modes»), press PT1 once. The

display will show the figures (constantly on) and the symbol (flashing). Turn PT1 to set the minutes of cooking (from 00:01 to 23:59). A

few seconds after the required duration is set, the symbol will stop flashing, and the countdown will start from that moment. Now select the cooking function required and wait for the buzzer to sound, indicating that the cooking time is over.

Press PT1 once to stop the buzzer. You can now set an additional cooking time by turning PT1, or return to display of the current time by pressing PT1 twice.

Press PT2 once to end the cooking process and switch the oven to OFF status.

The minute minder also function works with no function set.

Warning: the minute minder function does not stop the cooking process. It only warns the user that the preset number of minutes have passed.

To switch the oven off, press PT2.

Modifying the data set

Once the countdown has started, its duration can be changed while cooking is in progress.

When the symbol is steady and cooking is in progress, press PT1 once. The symbol starts flashing and PT1 can be turned to change the

set duration. A few seconds after the last change, the symbol will stop flashing, and the countdown will restart from the new value.

To change the preset temperature, wait for the symbol to become steady and turn PT1 to the right or left to increase or decrease the cooking temperature.

7.5.2 Semiautomatic cooking

Semiautomatic cooking is the function which allows a cooking operation to be started and then ended after a specific length of time set by the user.

44

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Table of Contents Precautions for Use Precautions for USEDisposal instructions Disposal Instructions OUR Environment PolicySafety precautions Safety PrecautionsInstructions for the User Before InstallationGET to Know Your Oven From now on, for convenience it will be referred to as DSP1 Description of Front Panel ControlsFor convenience it will be referred to as PT1 From now on, for convenience it will be referred to as DSP2FUNCTION-SWITCH on Knob From now on, for convenience it will be referred to as PT2Precautions and General Advice Using the OvenOperating modes First use Selecting the functionModifying the data set Programmed cooking proceduresTimed cooking with timer Semiautomatic cookingAutomatic cooking Secondary menu Power selection function Child safety lock-out functionShow Room Function Cooling fan system Inside lightUsing the Pizza Function on Some Models only Precautions for using the pizza plateTo save energy Accessories Available Chromium-plated gripper useful forRecommended Cooking Tables Conventional CookingGrilling Rotisserie Cooking on Some Models only Routine daily cleaning Cleaning and MaintenanceCleaning stainless steel Food stains or spillsCleaning the oven On some models onlyCleaning the door glazing Before starting the automatic cleaning cycle Pyrolysis automatic oven cleaning90 MIN 135 MIN 180 MIN 300 How the automatic cleaning cycle works500 Setting the cleaning cycle Extraordinary Maintenance Changing the light bulbRemoving the door Instructions for the InstallerRemoving doors with pins Removing the gasketRemoving the inside glass with the door cold Electrical connection Installing the ApplianceOperation at 220-240 V~ use a Positioning the oven Instructions for the Installer
Top Page Image Contents