Smeg XXSC111P manual Removing the inside glass with the door cold

Page 29

Instructions for the User

12.4 Removing the inside glass with the door cold

The glass in the door should always be kept thoroughly clean. For easier cleaning, the door glazing can be fully removed by proceeding as described below. After opening the door and locking it in place as described in point «12.2 Removing the door», remove the three panes of glass. They are all removed in two stages: first extract the pane from the guide «A» (see detail) by sliding it towards you and lifting it slightly, then also free it from the guide «B». If the door should close during these operations, simply relock one of the hinges as described in point «12.2 Removing the door». The panes of glass can now be washed separately.

Use absorbent kitchen roll; remove stubborn dirt with a damp sponge and ordinary detergent.

Caution: before removing the panes of glass, make sure that at least one of the door's hinges has been locked in open position as described in points «12.2 Removing the door». This operation might have to be repeated during the glass removal process if the door is accidentally freed.

Caution: replace the panes of glass in the same order and in the same position as before removal, taking care to push the last pane with the marking into the guide A to lock it in place. When complete, release the hinges and close the door.

In the diagram below, the 3 panes of glass have been removed.

63

Image 29

Contents Table of Contents Precautions for USE Precautions for UseDisposal Instructions OUR Environment Policy Disposal instructionsSafety Precautions Safety precautionsGET to Know Your Oven Before InstallationInstructions for the User For convenience it will be referred to as PT1 Description of Front Panel ControlsFrom now on, for convenience it will be referred to as DSP1 From now on, for convenience it will be referred to as DSP2From now on, for convenience it will be referred to as PT2 FUNCTION-SWITCH on KnobOperating modes Using the OvenPrecautions and General Advice Selecting the function First useTimed cooking with timer Programmed cooking proceduresModifying the data set Semiautomatic cookingAutomatic cooking Secondary menu Show Room Function Child safety lock-out functionPower selection function Inside light Cooling fan systemPrecautions for using the pizza plate Using the Pizza Function on Some Models onlyTo save energy Chromium-plated gripper useful for Accessories AvailableConventional Cooking Recommended Cooking TablesGrilling Rotisserie Cooking on Some Models only Cleaning stainless steel Cleaning and MaintenanceRoutine daily cleaning Food stains or spillsOn some models only Cleaning the ovenCleaning the door glazing 90 MIN 135 MIN 180 MIN Pyrolysis automatic oven cleaningBefore starting the automatic cleaning cycle 500 How the automatic cleaning cycle works300 Setting the cleaning cycle Changing the light bulb Extraordinary MaintenanceRemoving doors with pins Instructions for the InstallerRemoving the door Removing the gasketRemoving the inside glass with the door cold Operation at 220-240 V~ use a Installing the ApplianceElectrical connection Positioning the oven Instructions for the Installer