Smeg XXSC111P Using the Pizza Function on Some Models only, Precautions for using the pizza plate

Page 15

Instructions for the User

8. USING THE PIZZA FUNCTION (ON SOME MODELS ONLY)

This appliance is equipped with a function specially developed for cooking pizza. This function is identified by the symbol on the oven functions knob. To cook a pizza, proceed as described below.

With the oven cold, remove the circular cover from the bottom of the oven (fig. 1) and fit the pizza plate in its place (Fig. 2).

1) 2)

Press PT2 to switch the oven on, then use PT2 again to select the function. The display will show the recommended temperature for cooking pizza (280°C), (for the 2300W low energy consumption mode the recommended cooking temperature is 260°C). The recommended temperature can still be varied using PT1.

Preheat with these settings until the symbol (on DSP3) remains constantly on, then place the pizza on the special plate. It does not normally take more than 3-4 minutes to cook a pizza to perfection, although this time may vary depending on the dough used or individual taste.

8.1Precautions for using the pizza plate

•Never use the pizza plate except as described above (for example, never use it on gas or ceramic hobs, or on ovens not designed to take this accessory).

•The pizza plate may be left in place while conventional cooking operations are in progress. Simply place the cover over it, taking care to fit it securely.

•Never use any oven function if the pizza plate or cover is not in position.

•The appliance becomes very hot during use. Oven gloves should always be worn.

•If you like oil on your pizza, it is best to add it after removal from the oven since oil stains on the pizza plate are unsightly and may reduce its efficiency.

49

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Table of Contents Precautions for USE Precautions for UseDisposal Instructions OUR Environment Policy Disposal instructionsSafety Precautions Safety precautionsBefore Installation Instructions for the UserGET to Know Your Oven From now on, for convenience it will be referred to as DSP2 Description of Front Panel ControlsFor convenience it will be referred to as PT1 From now on, for convenience it will be referred to as DSP1From now on, for convenience it will be referred to as PT2 FUNCTION-SWITCH on KnobUsing the Oven Precautions and General AdviceOperating modes Selecting the function First useSemiautomatic cooking Programmed cooking proceduresTimed cooking with timer Modifying the data setAutomatic cooking Secondary menu Child safety lock-out function Power selection functionShow Room Function Inside light Cooling fan systemPrecautions for using the pizza plate Using the Pizza Function on Some Models onlyTo save energy Chromium-plated gripper useful for Accessories AvailableConventional Cooking Recommended Cooking TablesGrilling Rotisserie Cooking on Some Models only Food stains or spills Cleaning and MaintenanceCleaning stainless steel Routine daily cleaningOn some models only Cleaning the ovenCleaning the door glazing Pyrolysis automatic oven cleaning Before starting the automatic cleaning cycle90 MIN 135 MIN 180 MIN How the automatic cleaning cycle works 300500 Setting the cleaning cycle Changing the light bulb Extraordinary MaintenanceRemoving the gasket Instructions for the InstallerRemoving doors with pins Removing the doorRemoving the inside glass with the door cold Installing the Appliance Electrical connectionOperation at 220-240 V~ use a Positioning the oven Instructions for the Installer
Top Page Image Contents