Smeg XXSC111P manual Instructions for the Installer, Removing the door, Removing the gasket

Page 28

Instructions for the Installer

12.2Removing the door

12.2.1 With type 1 mobile levers

With the door completely open, lift the levers A of the two hinges until they touch the hinges B and take hold of the two sides of the door with both hands close to the 1) hinges.

Raise the door to an angle of about 45° and remove it. If the hinges have not locked, repeat the operation, raising the levers and keeping the door slightly raised. To reassemble, fit the hinges B into their grooves, then lower the door into place, ensuring that it remains fitted into the grooves C, then lower the levers A.

12.2.2 Removing doors with pins

Open the door completely and insert the pins (supplied) into the holes from the inside. Close the door to an angle of about 45° and lift it off. To reassemble, fit the hinges into their grooves, then lower the door into place and extract the pins.

12.3 Removing the gasket

To allow thorough cleaning of the oven, the door gasket can be removed.

62

Image 28

Contents Table of Contents Precautions for Use Precautions for USEDisposal instructions Disposal Instructions OUR Environment PolicySafety precautions Safety PrecautionsInstructions for the User Before InstallationGET to Know Your Oven Description of Front Panel Controls For convenience it will be referred to as PT1From now on, for convenience it will be referred to as DSP1 From now on, for convenience it will be referred to as DSP2FUNCTION-SWITCH on Knob From now on, for convenience it will be referred to as PT2Precautions and General Advice Using the OvenOperating modes First use Selecting the functionProgrammed cooking procedures Timed cooking with timerModifying the data set Semiautomatic cookingAutomatic cooking Secondary menu Power selection function Child safety lock-out functionShow Room Function Cooling fan system Inside lightUsing the Pizza Function on Some Models only Precautions for using the pizza plateTo save energy Accessories Available Chromium-plated gripper useful forRecommended Cooking Tables Conventional CookingGrilling Rotisserie Cooking on Some Models only Cleaning and Maintenance Cleaning stainless steelRoutine daily cleaning Food stains or spillsCleaning the oven On some models onlyCleaning the door glazing Before starting the automatic cleaning cycle Pyrolysis automatic oven cleaning90 MIN 135 MIN 180 MIN 300 How the automatic cleaning cycle works500 Setting the cleaning cycle Extraordinary Maintenance Changing the light bulbInstructions for the Installer Removing doors with pinsRemoving the door Removing the gasketRemoving the inside glass with the door cold Electrical connection Installing the ApplianceOperation at 220-240 V~ use a Positioning the oven Instructions for the Installer