Smeg XXSC111P manual Automatic cooking

Page 11

Instructions for the User

Select a cooking function (see point «7.4 Selecting the function») and

press PT1 twice. The display will show the figures and the symbol (flashing).

Turn PT1 to the right or left to set the minutes of cooking (from 00:01 to

23:59). A few seconds after the required duration is set, the symbol will stop flashing, and semiautomatic cooking will start from that moment. At the end, the word STOP will appear on DSP1, cooking will stop and a buzzer will sound; press PT1 once to deactivate it.

If you wish to continue cooking beyond the set time, press PT1 again. The oven will restart normal operation with the cooking settings selected previously.

PT2 has to be pressed to switch the oven off completely.

Modifying the data set

Once semiautomatic cooking has started, its duration can be changed.

When the symbol is steady and cooking is in progress, press PT1 once. The symbol starts flashing and PT1 can be turned to change the

set duration. A few seconds after the last change, the symbol will stop flashing, and semiautomatic cooking will restart from the new value.

To change the preset temperature, wait for the symbol to become steady and turn PT1 to the right or left to increase or decrease the cooking temperature.

7.5.3 Automatic cooking

Automatic cooking is the function which allows a cooking operation to be started at a set time and then ended after a specific length of time set by the user.

Select a cooking function, set the cooking temperature required or leave the preset temperature (see point «7.4 Selecting the function») and press

PT1 twice. The display will show the figures and the symbol (flashing).

Turn PT1 to the right or left to set the minutes of cooking (from 00:01 to 23:59).

For reasons of safety, when setting automatic cooking the user must first program a cooking duration and then set the cooking start time. It is not possible to set the cooking start time only, without setting the cooking duration.

45

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Table of Contents Precautions for USE Precautions for UseDisposal Instructions OUR Environment Policy Disposal instructionsSafety Precautions Safety precautionsGET to Know Your Oven Before InstallationInstructions for the User From now on, for convenience it will be referred to as DSP2 Description of Front Panel ControlsFor convenience it will be referred to as PT1 From now on, for convenience it will be referred to as DSP1From now on, for convenience it will be referred to as PT2 FUNCTION-SWITCH on KnobOperating modes Using the OvenPrecautions and General Advice Selecting the function First useSemiautomatic cooking Programmed cooking proceduresTimed cooking with timer Modifying the data setAutomatic cooking Secondary menu Show Room Function Child safety lock-out functionPower selection function Inside light Cooling fan systemPrecautions for using the pizza plate Using the Pizza Function on Some Models onlyTo save energy Chromium-plated gripper useful for Accessories AvailableConventional Cooking Recommended Cooking TablesGrilling Rotisserie Cooking on Some Models only Food stains or spills Cleaning and MaintenanceCleaning stainless steel Routine daily cleaningOn some models only Cleaning the ovenCleaning the door glazing 90 MIN 135 MIN 180 MIN Pyrolysis automatic oven cleaningBefore starting the automatic cleaning cycle 500 How the automatic cleaning cycle works300 Setting the cleaning cycle Changing the light bulb Extraordinary MaintenanceRemoving the gasket Instructions for the InstallerRemoving doors with pins Removing the doorRemoving the inside glass with the door cold Operation at 220-240 V~ use a Installing the ApplianceElectrical connection Positioning the oven Instructions for the Installer
Top Page Image Contents