Smeg XXSC111P manual Secondary menu

Page 12

Instructions for the User

After setting the duration, press PT1 once.

The symbol and the current time will appear on the display.

Turning PT1 to the right increases the time, allowing the cooking start time required to be set.

A few seconds after the required duration is set, the and symbols will stop flashing, and the oven will start to wait for the starting time set. At the end, the word STOP will appear on DSP1, cooking will stop and a buzzer will sound; press PT1 once to deactivate it.

If you wish to continue cooking beyond the set time, press PT1 again. The oven will restart normal operation with the cooking settings selected previously.

PT2 has to be pressed to switch the oven off completely.

Modifying the data set

Once automatic cooking has started, its duration can be changed.

When the and symbols are steady and cooking is in progress, or the oven is in standby status waiting for cooking to start, press PT1 once.

The symbol starts flashing and PT1 can be turned to change the set duration.

Press PT1 again; the symbol goes out, the symbol will start to flash, and the cooking start time will be displayed on DSP1. The cooking start time can be increased or decreased by turning PT1.

A few seconds after the last change, the e symbols will appear (in steady mode) on DSP1 and automatic cooking will restart with the new settings.

Once cooking has been programmed, before it starts all the lamps on the control panel will be on, except for DSP2 which will illuminate when cooking has started, showing the set temperature.

7.6Secondary menu

This appliance also has a concealed «secondary menu» allowing the user to:

1Activate or deactivate the child safety device ();

2Activate or deactivate the Show Room function (which disables all the heating elements so that only the control panel works);

3Activate or deactivate the function which limits the maximum power absorption to 2300 W;

46

Image 12
Contents Table of Contents Precautions for Use Precautions for USEDisposal instructions Disposal Instructions OUR Environment PolicySafety precautions Safety PrecautionsBefore Installation Instructions for the UserGET to Know Your Oven Description of Front Panel Controls For convenience it will be referred to as PT1From now on, for convenience it will be referred to as DSP1 From now on, for convenience it will be referred to as DSP2FUNCTION-SWITCH on Knob From now on, for convenience it will be referred to as PT2Using the Oven Precautions and General AdviceOperating modes First use Selecting the functionProgrammed cooking procedures Timed cooking with timerModifying the data set Semiautomatic cookingAutomatic cooking Secondary menu Child safety lock-out function Power selection functionShow Room Function Cooling fan system Inside lightUsing the Pizza Function on Some Models only Precautions for using the pizza plateTo save energy Accessories Available Chromium-plated gripper useful forRecommended Cooking Tables Conventional CookingGrilling Rotisserie Cooking on Some Models only Cleaning and Maintenance Cleaning stainless steelRoutine daily cleaning Food stains or spillsCleaning the oven On some models onlyCleaning the door glazing Pyrolysis automatic oven cleaning Before starting the automatic cleaning cycle90 MIN 135 MIN 180 MIN How the automatic cleaning cycle works 300500 Setting the cleaning cycle Extraordinary Maintenance Changing the light bulbInstructions for the Installer Removing doors with pinsRemoving the door Removing the gasketRemoving the inside glass with the door cold Installing the Appliance Electrical connectionOperation at 220-240 V~ use a Positioning the oven Instructions for the Installer