Smeg XXSC111P manual Child safety lock-out function, Show Room Function, Power selection function

Page 13

Instructions for the User

7.6.1 Child safety lock-out function

With the oven in OFF status (see point «7.2 Operating modes») keep PT1 pressed until the message OFF SHO appears on DSP1. Now press PT1 until the message «OFF BLOC» appears on DPS1.

Turn PT1 to the right or left to activate (ON BLOC) or deactivate (OFF BLOC) this function, which locks out all the functions and knobs after 2 minutes of operation without any command from the user (when this system is active, the symbol appears on DPS2).

After setting the parameter required, press PT2 to return the oven to the initial standby status.

To exit the lockout status temporarily to modify a cooking program or

select a different function, keep PT1 pressed until the symbol disappears from DSP2. The required changes can now be made, and 2 minutes after the last setting is made the lockout will come into operation again.

To deactivate the lockout permanently, access the secondary menu and switch the function off as described in this section.

7.6.2 Show Room Function

With the oven in OFF status (see point «7.2 Operating modes») keep PT1 pressed until the message OFF SHO appears on DSP1. This means that the SHOW ROOM function (which disables all the heating elements so that only the control panel works) is not active.

Turn PT1 to the right or left to activate (ON SHO) or deactivate (OFF SHO) this function. To use the oven normally, set OFF SHO.

After setting the parameter required, press PT2 to return the oven to the initial standby status.

7.6.3 Power selection function

With the oven in OFF status (see point «7.2 Operating modes») keep PT1 pressed until the message OFF SHO appears on DSP1. Now press PT1 once again and the message «OFF 2300» will appear on DPS1.

Turn PT1 to the right or left to activate (ON 2300) or deactivate (OFF 2300) this function, which limits the oven's maximum power absorption, in any function, to 2300 W.

After setting the parameter required, press PT2 to return the oven to the initial standby status.

47

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Table of Contents Precautions for USE Precautions for UseDisposal Instructions OUR Environment Policy Disposal instructionsSafety Precautions Safety precautionsInstructions for the User Before InstallationGET to Know Your Oven For convenience it will be referred to as PT1 Description of Front Panel ControlsFrom now on, for convenience it will be referred to as DSP1 From now on, for convenience it will be referred to as DSP2From now on, for convenience it will be referred to as PT2 FUNCTION-SWITCH on KnobPrecautions and General Advice Using the OvenOperating modes Selecting the function First useTimed cooking with timer Programmed cooking proceduresModifying the data set Semiautomatic cookingAutomatic cooking Secondary menu Power selection function Child safety lock-out functionShow Room Function Inside light Cooling fan systemPrecautions for using the pizza plate Using the Pizza Function on Some Models onlyTo save energy Chromium-plated gripper useful for Accessories AvailableConventional Cooking Recommended Cooking TablesGrilling Rotisserie Cooking on Some Models only Cleaning stainless steel Cleaning and MaintenanceRoutine daily cleaning Food stains or spillsOn some models only Cleaning the ovenCleaning the door glazing Before starting the automatic cleaning cycle Pyrolysis automatic oven cleaning90 MIN 135 MIN 180 MIN 300 How the automatic cleaning cycle works500 Setting the cleaning cycle Changing the light bulb Extraordinary MaintenanceRemoving doors with pins Instructions for the InstallerRemoving the door Removing the gasketRemoving the inside glass with the door cold Electrical connection Installing the ApplianceOperation at 220-240 V~ use a Positioning the oven Instructions for the Installer
Top Page Image Contents