Taylor model 430 torque shake/slush freezer Operating Procedures Model 430 Torque

Page 16

Holding the beater securely, slide the beater into the freezing cylinder and align the hole at the rear of the beater with the flats on the end of the drive shaft.

Slide the beater the remainder of the way into the freezing cylinder and over the end of the drive shaft. The beater assembly will not protrude beyond the front of the freezing cylinder.

Figure 7

Step 3

Install the white plastic guide bearing on the short end of the torque rotor. Slide the o- ring into the groove on the long end of the torque rotor and lubricate the o- ring. Do not lubricate the guide bearing.

Figure 8

Step 4

Insert the torque rotor end with the guide bearing into the pilot hole in the center of the drive shaft. The hole in the torque rotor shaft should be rotated to the 12 o’clock position.

Figure 9

Step 5

Assemble the freezer door with the “Ice Buster” (door spout clearing device). To assemble the door with the ice buster, install the o- rings on the draw valve and lubricate.

Figure 10

Insert the draw valve into the door, leaving approximately 1/2” of the valve sticking out the top of the door.

Figure 11

Operating Procedures

12

Model 430 Torque

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Operators Manual Information found on data plate Table of Contents Table of Contents Installer Safety Model 430 Torque To the InstallerSection Site PreparationTo the Installer Model 430 Torque Air Cooled UnitsElectrical Connections 130930Refrigerant Beater Rotation130816 To the Operator 131202 To the Operator Model 430 TorqueSection Safety Model 430 Torque Safety130930 Safety Model 430 Torque Operator Parts Identification Description Part Number070104 Model 430 Torque Operator Parts Identification130816 Operator Parts Identification Model 430 Torque 140102 Section Important To the Operator Section Operating Procedures AssemblyModel 430 Torque Operating Procedures StepOperating Procedures Model 430 Torque Step 090114 Operating Procedures Model 430 Torque SanitizingPriming 140804Closing Procedure 140804 Operating Procedures Model 430 TorqueDraining Product From The Freezing Cylinder RinsingCleaning DisassemblyBrush Cleaning 090114 Model 430 Torque Operating ProceduresImportant Operator Checklist During Cleaning and SanitizingRegular Maintenance Checks 071205 Important Operator Checklist Model 430 TorqueModel 430 Torque Important Operator Checklist Winter StorageSection Troubleshooting Guide Troubleshooting Guide Model 430 TorqueModel 430 Torque Troubleshooting Guide Parts Replacement Schedule Parts Replacement Schedule Model 430 TorqueProduct Part Limited Warranty Period Soft Serve Model 430 Torque Limited Warranty on EquipmentFrozen Yogurt ShakesLimited Warranty on Equipment Model 430 Torque Part’s Warranty Class Code or Part Limited Warranty Period Model 430 Torque Limited Warranty on PartsLimited Warranty on Parts Model 430 Torque Taylor Company Torque Company 430Torque

model 430 torque shake/slush freezer specifications

The Taylor Model 430 Torque Shake/Slush Freezer is a versatile machine that stands out in the world of foodservice equipment, particularly in the realm of frozen desserts and beverages. This innovative machine is designed to offer high-quality slush and shake production, making it an essential addition to restaurants, cafes, and mobile vending operations.

One of the main features of the Taylor Model 430 is its ability to produce a variety of frozen treat options, including shakes, smoothies, and slushes. With its user-friendly controls, operators can easily adjust the consistency and texture of the frozen product, ensuring each serving meets the desired standards of quality. The machine operates with precision, delivering results that are not only delicious but also consistent, enhancing customer satisfaction.

The technology behind the Taylor Model 430 is state-of-the-art, incorporating both advanced refrigeration techniques and easy-to-use electronic controls. Its high-efficiency refrigeration system allows for rapid chilling and freezing, crucial for maintaining the ideal serving temperature for frozen desserts. The unit is equipped with a high-capacity compressor, ensuring that it can handle the demands of a busy service environment while minimizing energy consumption.

Another key characteristic of the Model 430 is its compact design, making it suitable for locations with limited space. Despite its small footprint, the machine does not compromise on capacity, allowing for a substantial output of frozen goods, which is critical in high-demand situations. Additionally, the easy access to internal components simplifies cleaning and maintenance, ensuring that the machine remains in optimal working condition.

The Taylor Model 430 also features an intuitive interface that enables operators to quickly learn and master its functions. This simplicity is paired with robust safety features that protect both the equipment and the user, making it a reliable choice for business owners.

In conclusion, the Taylor Model 430 Torque Shake/Slush Freezer is a standout machine in the market for frozen dessert and beverage production. Its combination of advanced technology, user-friendly design, and versatility makes it an invaluable asset for foodservice establishments looking to expand their offerings while providing high-quality products to their customers. Its reliability and efficiency have made it a trusted choice in the industry, leading to increased profitability and customer satisfaction.
Top Page Image Contents