Taylor model 430 torque shake/slush freezer Section Safety, Model 430 Torque Safety

Page 9

Section 3

Safety

 

 

We, at Taylor Company, are concerned about the safety of the operator at all times when they are coming in contact with the unit and its parts. Taylor makes every effort to design and manufacture built- in safety features to protect both operators and service technicians.

Installing and servicing refrigeration equipment can be hazardous due to system pressure and electrical components. Only trained and qualified service personnel should install, repair, or service refrigeration equipment. When working on refrigeration equipment, observe precautions noted in the literature, tags and labels attached to the unit, and other safety precautions that may apply. Follow all safety code requirements. Wear safety glasses and work gloves.

IMPORTANT - Failure to adhere to the following safety precautions may result in severe personal injury or death. Failure to comply with these warnings may damage the machine and its components. Component damage will result in part replacement expense and service repair expense.

DO NOT operate the freezer without reading this Operator Manual. Failure to follow this instruction may result in equipment damage, poor freezer performance, health hazards, or personal injury.

This appliance is to be used only by trained personnel. It is not intended for use by children or people with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

DO NOT use a water jet to clean or rinse the freezer. Failure to follow these instructions may result in serious electrical shock.

SDO NOT operate the freezer unless it is properly grounded.

SDO NOT operate the freezer with larger fuses than specified on the freezer data label.

SAll repairs must be performed by an authorized Taylor service technician.

SThe main power supplies to the machine must be disconnected prior to performing any repairs.

SFor Cord Connected Units: Only Taylor authorized service technicians or licensed electricians may install a plug or replacement cord on these units.

SStationary appliances which are not equipped with a power cord and a plug or another device to disconnect the appliance from the power source must have an all-pole disconnecting device with a contact gap of at least 3 mm installed in the external installation.

SAppliances that are permanently connected to fixed wiring and for which leakage currents may exceed 10 mA, particularly when disconnected, not used for long periods, or during initial installation, shall have protective devices such as a GFI to protect against the leakage of current, installed by authorized personnel to the local codes.

SSupply cords used with this unit shall be oil-resistant, sheathed flexible cable, not lighter than ordinary polychloroprene or other equivalent synthetic elastomer-sheathed cord (Code designation 60245 IEC 57) installed with the proper cord anchorage to relieve conductors from strain, including twisting, at the terminals and protect the insulation of the conductors from abrasion.

If the supply cord is damaged, it must be replaced by an authorized Taylor service technician in order to avoid a hazard.

Failure to follow these instructions may result in electrocution. Contact your local authorized Taylor Distributor for service.

 

 

130930

 

 

 

Model 430 Torque

5

Safety

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Operators Manual Information found on data plate Table of Contents Table of Contents Model 430 Torque To the Installer Installer SafetySection Site PreparationAir Cooled Units To the Installer Model 430 TorqueElectrical Connections 130930Beater Rotation Refrigerant130816 131202 To the Operator Model 430 Torque To the OperatorModel 430 Torque Safety Section Safety130930 Safety Model 430 Torque Description Part Number Operator Parts Identification070104 Model 430 Torque Operator Parts Identification130816 Operator Parts Identification Model 430 Torque 140102 Section Important To the Operator Assembly Section Operating ProceduresModel 430 Torque Operating Procedures StepOperating Procedures Model 430 Torque Step Sanitizing 090114 Operating Procedures Model 430 Torque140804 Priming140804 Operating Procedures Model 430 Torque Closing ProcedureDraining Product From The Freezing Cylinder RinsingDisassembly CleaningBrush Cleaning 090114 Model 430 Torque Operating ProceduresDuring Cleaning and Sanitizing Important Operator ChecklistRegular Maintenance Checks 071205 Important Operator Checklist Model 430 TorqueWinter Storage Model 430 Torque Important Operator ChecklistTroubleshooting Guide Model 430 Torque Section Troubleshooting GuideModel 430 Torque Troubleshooting Guide Parts Replacement Schedule Model 430 Torque Parts Replacement ScheduleModel 430 Torque Limited Warranty on Equipment Product Part Limited Warranty Period Soft ServeFrozen Yogurt ShakesLimited Warranty on Equipment Model 430 Torque Model 430 Torque Limited Warranty on Parts Part’s Warranty Class Code or Part Limited Warranty PeriodLimited Warranty on Parts Model 430 Torque Taylor Company Torque Company 430Torque

model 430 torque shake/slush freezer specifications

The Taylor Model 430 Torque Shake/Slush Freezer is a versatile machine that stands out in the world of foodservice equipment, particularly in the realm of frozen desserts and beverages. This innovative machine is designed to offer high-quality slush and shake production, making it an essential addition to restaurants, cafes, and mobile vending operations.

One of the main features of the Taylor Model 430 is its ability to produce a variety of frozen treat options, including shakes, smoothies, and slushes. With its user-friendly controls, operators can easily adjust the consistency and texture of the frozen product, ensuring each serving meets the desired standards of quality. The machine operates with precision, delivering results that are not only delicious but also consistent, enhancing customer satisfaction.

The technology behind the Taylor Model 430 is state-of-the-art, incorporating both advanced refrigeration techniques and easy-to-use electronic controls. Its high-efficiency refrigeration system allows for rapid chilling and freezing, crucial for maintaining the ideal serving temperature for frozen desserts. The unit is equipped with a high-capacity compressor, ensuring that it can handle the demands of a busy service environment while minimizing energy consumption.

Another key characteristic of the Model 430 is its compact design, making it suitable for locations with limited space. Despite its small footprint, the machine does not compromise on capacity, allowing for a substantial output of frozen goods, which is critical in high-demand situations. Additionally, the easy access to internal components simplifies cleaning and maintenance, ensuring that the machine remains in optimal working condition.

The Taylor Model 430 also features an intuitive interface that enables operators to quickly learn and master its functions. This simplicity is paired with robust safety features that protect both the equipment and the user, making it a reliable choice for business owners.

In conclusion, the Taylor Model 430 Torque Shake/Slush Freezer is a standout machine in the market for frozen dessert and beverage production. Its combination of advanced technology, user-friendly design, and versatility makes it an invaluable asset for foodservice establishments looking to expand their offerings while providing high-quality products to their customers. Its reliability and efficiency have made it a trusted choice in the industry, leading to increased profitability and customer satisfaction.
Top Page Image Contents