Gaggenau EB 260/261 manual Important notes, For your safety, Operating for the first time

Page 4
1. Important notes

1. Important notes

1.1 For your safety

You must not operate the appliance if it is damaged.

The appliance must only be connected by an authorised specialist, paying attention to the relevant regulations of the power supply companies and the regional construction regulations. Observe the assembly instructions!

When connecting electrical appliances and devices in the proximity of cooking surfaces and ovens, make sure that connecting cables do not become jammed under the hot oven door or come into contact with hot cooking surfaces.

As the user, you yourself are responsible for maintenance and proper use in the household.

Only ever operate the appliance under supervision.

Caution: fire risk! Do not store any combustible items in your oven. During operation, only leave the parts in the cooking compartment that you actually need.

Caution! The appliance and, until the cooling fan is switched on, also the control panel heat up during operation. Keep children away !

Note: to avoid jeopardising the electrical safety of the appliance, it is forbidden to use high-pressure or steam jet cleaning devices.

The appliance has to be isolated from the mains during all maintenance. To do this, remove the mains plug or actuate the corresponding fuse.

Repairs may only be carried out by authorised electricians, in order to guarantee the safety of the appliance.

No warranty claims can be lodged for any damage resulting from failure to observe these instructions.

Technical modifications reserved.

1.2 Operating for the first time

Before operating the appliance for the first time, please pay attention to the following notes:

Read through these instructions attentively before operating your appliance for the first time.

The appliance must be installed and connected by

aspecialist.

Remove the packaging from the appliance and dispose of it properly.

Pay attention to the fact that there are accessories in the base of the packaging.

Keep packaging material away from children.

Before operating the appliance for the first time, make sure that the mains connection is in proper working order.

Before using the oven for the first time, remove all removable interior parts (grid iron, tray ...). Now operate the oven for one hour at 300 °C in the hot air mode. During this time, pay attention to ensuring that the room is ventilated well, thus removing any newness smells.

Thoroughly clean the appliance and accessories before using them for the first time (see chapter entitled “Cleaning and care”).

After a new connection or a power failure, the suggested time of 8:00 lights up on the display and the 1.1 For your safety1.2 Operating for the first timeManual background symbol (Time unit) flashes. By pressing the + and – keys, you can set the current time and you can confirm it by pressing the Manual background (Confirmation) key. This will ensure perfect functioning of the appliance. The suggested time 8:00 will be stored as the time of day if you turn one of the control knobs.

The rating plate for this appliance is visible when you open the appliance door. An additional rating plate is included on a separate sheet of the instructions. For warranty reasons, store this rating plate in the same location as your operating and assembly instructions.

3

Image 4
Contents Built-in oven Operating and Installation InstructionsEB 260/261 EB 260/261 Preface 1. Important notes 1.1 For your safety1.2 Operating for the first time 1.3 About use 2. Structure and operating principle 2.1 Structure2.2 Accessories / special accessories 2.3 Operating principle of the operating modes Grilling Baking stone operation with special accessories PS 026 and HZ 026 only 2.4 Special functions 3. Operation 3.1 Overview3.2 Operating the timer Setting the time of day Proceed as follows Press the + key. The short time symbol flashes Fig Elapsing timer Proceed as followsWhen you press the - key again, the timer is switched off You can use this function even when the appliance is switched offProgramming a cooking time You can query the entered value by pressing the Timer key twice Programming a switch-off timeEnter the required switch-off time see above Proceed as follows Enter a required duration see Page3.3 Hot air circulation 3.4 ECO3.5 Top and bottom heat / Top heat 3.6 Hot air circulation and bottom heat3.7 Grilling 3.8 Special functions Options menu temperature display C/F time display 24h/12h am/pm ECO plus on/offWith the aid of the Options menu, you can choose between C and F on the temperature display4. Baking table from belowRoasting table Roasting table Grilling table 5. Tips and tricks Tips for baking Tips for roasting and grillingBefore serving, allow the roast to rest for Place pieces for grilling directly on the grid iron6. Cleaning and care 6.1 Manual cleaning6.2 Pyrolysis self-cleaning symbol lights up during this time. The oven symbols light upDo not try to open the oven door during the self- cleaning process Enter the required switch-off time see Chapter7. Maintenance 7.1 General 7.2 Replacing the lamp7.3 Disassembly of the front window GAGGENAU HAUSGERÄTE GMBH P.O. BOX 10 02 50 · D -80076 MÜNCHEN