Gaggenau EB 260/261 manual Maintenance, General 7.2 Replacing the lamp

Page 32
7. Maintenance

7. Maintenance

7.1 General

7.2 Replacing the lamp

Fig. 42

Fig. 43

The appliance must always be disconnected from the mains when being repaired.

If the appliance does not function correctly, check the fuses first.

If the power supply is functioning correctly, but your appliance still does not work, please contact your dealer or your local Gaggenau customer service agency. Specify the appliance type (see rating plate).

Repairs may only be carried out by authorised electricians, in order to guarantee the safety of the appliance.

Unauthorised tampering with the appliance will invalidate any warranty claims.

You can obtain spare lamps from Gaggenau Customer Service or a dealer. We recommend that you use these lamps only. (Order number 157312) Proceed as follows:

Disconnect fuses.

Remove one of the lamp cover screws.

Swivel the cover to the side.

Caution: the lamp cover may still be hot.

Push the lamp to the side by about 4-5 mm. The lamp can now be titled down and removed.

Insert the lamp in the reverse order. Swivel the cover back to its original position and screw it on. (Caution: secure the seal properly!)

Note: do not touch the halogen lamp with your hands. Use a cloth and only touch the edges of the lamp.

31

Image 32
Contents EB 260/261 Operating and Installation InstructionsBuilt-in oven EB 260/261 Preface 1.2 Operating for the first time 1.1 For your safety1. Important notes 1.3 About use 2. Structure and operating principle 2.1 Structure2.2 Accessories / special accessories 2.3 Operating principle of the operating modes Grilling Baking stone operation with special accessories PS 026 and HZ 026 only 2.4 Special functions 3. Operation 3.1 Overview3.2 Operating the timer Setting the time of day Proceed as follows Press the + key. The short time symbol flashes Fig Elapsing timer Proceed as followsWhen you press the - key again, the timer is switched off You can use this function even when the appliance is switched offProgramming a cooking time You can query the entered value by pressing the Timer key twice Programming a switch-off timeEnter the required switch-off time see above Proceed as follows Enter a required duration see Page3.3 Hot air circulation 3.4 ECO3.5 Top and bottom heat / Top heat 3.6 Hot air circulation and bottom heat3.7 Grilling 3.8 Special functions Options menu temperature display C/F time display 24h/12h am/pm ECO plus on/offWith the aid of the Options menu, you can choose between C and F on the temperature display4. Baking table from belowRoasting table Roasting table Grilling table 5. Tips and tricks Tips for baking Tips for roasting and grillingBefore serving, allow the roast to rest for Place pieces for grilling directly on the grid iron6. Cleaning and care 6.1 Manual cleaning6.2 Pyrolysis self-cleaning symbol lights up during this time. The oven symbols light upDo not try to open the oven door during the self- cleaning process Enter the required switch-off time see Chapter7. Maintenance 7.1 General 7.2 Replacing the lamp7.3 Disassembly of the front window GAGGENAU HAUSGERÄTE GMBH P.O. BOX 10 02 50 · D -80076 MÜNCHEN