Operating Instructions (FoodProbe)
USING THE FOOD PROBE:
You may use the food probe in the upper oven only to cook to the internal temperature of a food product, for more precise cooking.
1.Insert the tip of the food probe into the food.The first one inch of the probe is where the food temperature will be measured, so position it accordingly into the center of the meatiest portion, 1 inch from bone. Do not position it next to a bone in the meat, since this will affect the temperature.
2.Then place the food product (with the probe already inserted) in the oven and insert the plug of the food probe into the receptacle located at the top right front of the oven.
Location for the plug end of food probe here.
Insert the food probe
3.About 5 seconds after inserting the
probe’s plug into the oven receptacle, the flashing word Probe will show in the display along with rapid beeping. Press the Probe key and enter a probe cooking temperature between 100°F to 200°F using the number keys.
4.The display will show the actual probe sensor temperature of the food.
5.About 5 seconds after entering the probe cooking temperature the words Conv. Bake and Roast will flash along with rapid beeping.The control is prompting you to enter a cooking mode, so select the mode you wish to use; upper Bake, Conv. Bake or Conv. Roast.
6.Next enter the temperature at which you want the oven to cook. Do not confuse this with the internal food temperature (the probe temperature) you set earlier.This will be the temperature of the oven to actually cook the food. Use the number keys to enter a temperature setting from 100°F to 550°F.
7.The oven will heat to the desired cooking temperature and cycle On & Off until it reaches the probe temperature.The actual probe temperature shows in the display.When the probe set temperature is reached, End will show in the display and the oven will chime 4 times, the actual probe temperature will flash and the oven will automatically turn off.The oven will chime once every minute for the next 10 minutes. As the food cools the flashing probe temperature will show the actual food temperature.
8.Be careful not to burn yourself when removing the food probe plug from the oven receptacle. Once removed the probe temperature digits will go blank.
9.Wash the stainless steel end of the food probe in hot soapy water but Do Not get the plug end of the probe wet.When not in use store in a dry place. It is not recommended to leave the probe in the oven when not in use.
WARNING: Do not leave the food probe in the oven during the self cleaning as the probe will be destroyed.
15