Whirlpool GSF26C4EXW Refrigerator USE, Using the Controls, Adjusting the Controls, Cooling On/Off

Page 11

REFRIGERATOR USE

Using the Controls

The refrigerator and freezer controls are located on the dispenser panel.

IMPORTANT: The display screen on the dispenser control panel will turn off automatically and enter “sleep” mode when the control buttons and dispenser pads have not been used for

2 minutes or more. While in “sleep” mode, the first press of a control button will only reactivate the display screen, without changing any settings. After reactivation, changes to any settings can then be made. If no changes are made within 2 minutes, the display will re-enter “sleep” mode.

Touch any control button on the dispenser panel to activate the display screen. The home screen will appear as shown.

Adjusting the Controls

For your convenience, your refrigerator and freezer controls are preset at the factory. When you first install your refrigerator, make sure that the controls are still set to the “mid-settings.” The factory recommended set points are 37°F (3°C) for the refrigerator and 0°F (-18°C) for the freezer.

IMPORTANT:

Wait 24 hours before you put food into the refrigerator. If you add food before the refrigerator has cooled completely, your food may spoil.

NOTE: Adjusting the set points to a colder than recommended setting will not cool the compartments any faster.

If the temperature is too warm or too cold in the refrigerator or freezer, first check the air vents to be sure they are not blocked before adjusting the controls.

The preset settings should be correct for normal household usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.

Wait at least 24 hours between adjustments. Recheck the temperatures before other adjustments are made.

To view and adjust the set points, press and hold the TEMP button for 3 seconds. When adjust mode is activated, adjusting information will appear on the display screen.

NOTE: To view Celsius temperatures, press the LIGHT button when adjust mode is activated. To return the display setting to Fahrenheit, press LIGHT again.

When adjust mode is activated, the display screen shows the refrigerator set point and “FRIDGE” appears.

Press LOCK to raise the set point, or press FAST ICE to lower the set point.

When you have finished viewing (and adjusting if desired) the refrigerator set point, press TEMP to change the display to show the freezer set point. When the zone has been changed, “FREEZER” appears on the display screen.

Press LOCK to raise the set point, or press FAST ICE to lower the set point.

When you have finished viewing (and adjusting if desired) both the refrigerator and freezer set points, press FILTER to save the settings.

NOTE: To exit without saving changes, press ICE TYPE at any time while in adjust mode, or allow about 60 seconds of inactivity and adjust mode will turn off automatically.

When adjusting temperature set points, use the following chart as a guide.

CONDITION:

TEMPERATURE

 

ADJUSTMENT:

 

 

REFRIGERATOR too cold

REFRIGERATOR Setting

 

1° higher

 

 

REFRIGERATOR too warm

REFRIGERATOR Setting

 

1° lower

 

 

FREEZER too cold

FREEZER Setting

 

1° higher

 

 

FREEZER too warm /

FREEZER Setting

Too little ice

1° lower

 

 

The set point range for the refrigerator is 33°F to 45°F (0°C to 7°C). The set point range for the freezer is -5°F to 5°F (-21°C to -15°C).

Cooling On/Off

Your refrigerator and freezer will not cool when cooling is turned off.

To turn cooling off, press and hold the LOCK and FILTER buttons at the same time for 3 seconds.

IMPORTANT: To avoid unintentionally locking the dispenser or changing other settings, be sure to press both buttons at exactly the same time.

When cooling is off, “COOLING OFF” will appear on the display screen.

Press and hold LOCK and FILTER for 3 seconds again to turn cooling back on.

11

Image 11
Contents Refrigerator User Instructions Refrigerator SafetyBefore You Throw Away Your Old Refrigerator or Freezer Installation InstructionsUnpack the Refrigerator Tools Needed Door Removal, Leveling and AlignmentReplace the Doors and Hinges Remove the wiring clip using a ¹⁄₄ hex-head socket wrenchDoor Alignment Handle Installation and RemovalTo Install the Handles Leveling and Door ClosingStyle 2 Slide-on Parts Included Door handles LocationRequirementsTo Remove the Handles Reverse Osmosis Water Supply Electrical RequirementsWater Supply Requirements Recommended Grounding MethodConnect to Refrigerator Connect Water SupplyStyle Connect to Water LineInstalling the Filter Status Indicator on some models Install Air FilterInstalling the Air Filter on some models Install Produce Preserver Refrigerator USE Using the ControlsAdjusting the Controls Condition Temperature AdjustmentWater and Ice Dispensers Convertible Drawer Temperature ControlCrisper Humidity Control Chilled Door BinTo Dispense Ice To Dispense WaterStyle Ice Maker and Storage Bin onsomemodelsTurning the Ice Maker On/Off Removing and Replacing Ice Storage BinWater Filtration System CleaningTo Clean Your Refrigerator Refrigerator CareRefrigerator is noisy TroubleshootingRefrigerator Operation Motor seems to run too muchHumid room? Contributes to moisture buildup Temperature and MoistureTemperature is too warm Iceand WaterAccessories Water Filtration System Performance Data SheetDisclaimer of Implied Warranties Limited WarrantyItems Excluded from Warranty This limited warranty does not coverSeguridad DEL Refrigerador Instrucciones Para EL Usuario DEL RefrigeradorAntes de tirar su viejo refrigerador o congelador Instrucciones DE InstalaciónDesempaque el refrigerador Herramientas Necesarias Remoción, nivelación y alineamiento delas puertasVuelva a colocar las puertas y las bisagras Quite las puertasAlineamiento de la puerta Nivelación y cierre de la puertaEstilo 1 Tornillos opresores Cómo instalar y remover las manijasPara instalar las manijas Para quitar las manijasMétodo de conexión a tierra recomendado Requisitos de ubicaciónRequisitos eléctricos Requisitos del suministro de aguaEstilo Conexióndel suministro de aguaSuministro de agua de ósmosis inversa Cómo terminar la instalación Instalación del filtro de aireReemplazo del filtro de aire Cómo instalar el filtro de aire en algunos modelosEn los modelos con muescas En los modelos sin muescasCómo ajustar los controles Uso de los controlesInstalación del indicador de estado en algunos modelos Condición Regulación DE LA Temperatura Control de temperatura del cajón convertiblePara despachar agua Depósito enfriador de la puertaDespachadores de agua y hielo Para encender y apagar la fábrica de hielo Fábrica dehielo y depósitoPara despachar hielo Luz de estado del filtro de agua Sistema de filtración de aguaCómo quitar y volver a colocar el depósito de hielo Cómo cambiar el filtro de agua LimpiezaCómo cambiar los focos Para limpiar su refrigeradorParece que el motor funciona excesivamente Solución DE ProblemasFuncionamiento delrefrigerador El refrigerador no funcionaNota Esto es una indicación de baja presión de agua Temperatura y humedadHielo y agua Accesorios Sistema de filtración de agua Hoja DE Datos DEL RendimientoEsta garantía limitada no cubre Whirlpool CorporationGarantía Limitada Exclusiones DE LA GarantíaWhirlpool Brand Home Appliances Sécurité DU Réfrigérateur Instructions Dutilisation DU RéfrigérateurAvant de jeter votre vieux réfrigérateur ou congélateur Instructions DinstallationDéballage duréfrigérateur Outillage Nécessaire Retrait, réglage de laplomb et alignement de la porteRemplacer les portes et les charnières Enlever les portesImportant Ne pas retirer l’une des vis a Alignement des portes Nivellement et fermeture de la porteStyle 1 Vis de blocage Installationet démontage des poignéesInstallation des poignées Retrait des poignéesSpécifications del’alimentationen eau Exigences demplacementMéthode recommandée de mise à la terre Spécifications électriquesRaccordement à une canalisation d’eau Raccordement de la canalisation deauAlimentation en eau par osmose inverse Pression de leauAchever l’installation Installationdu filtre à airModèles avec encoches Installer le sachet deconservation Pour produits fraisInstallation du filtre à air sur certains modèles Remplacement du filtre à airUtilisation DU Réfrigérateur Utilisation des commandesInstallation du témoin lumineux sur certains modèles Ajustement des commandesCaractéristiques supplémentaires Fast Ice glace rapide Alarme de porte entrouverteCondition Ajustement DE LA Température Refroidissement On/Off marche/arrêtDistributeurs d’eauet de glaçons Commande de température dans Le tiroir convertibleCompartiment fraîcheur dans la porte Distribution de glace Distribution d’eauMise en marche/arrêt de la machine à glaçons Pour retirer et réinstaller le bac à glaçonsMachine à glaçons et bac dentreposage Nettoyage de votre réfrigérateur Entretien DU RéfrigérateurSystème de filtrationde leau NettoyageFonctionnement du réfrigérateur Remplacement des ampoules d’éclairageDépannage Les portes sont difficiles à ouvrir Température et humiditéGlaçons et eau Heures pour la fabrication de nouveaux glaçons Les glaçons sont creux ou petitsRemarque Cela indique une faible pression de leau Filtre à air AccessoiresNettoyant et poli pour acier inoxydable Filtre à eauSystème de filtration d’eau Feuille DE Données SUR LA PerformanceLa présente garantie limitée ne couvre pas Garantie DE Gros Appareil Ménager Whirlpool CorporationGarantie Limitée Éléments Exclus DE LA GarantiePage Whirlpool Corporation All rights reserved W10297006C EN/FR PN W10281961C

WRS526SIAE, WRS526SIAH, W10297006C, GSF26C4EXB, GSF26C4EXW specifications

The Whirlpool ED2KVEXVQ, ED2KHAXVQ, GSS26C4XXB, GSF26C4EXW, and GSF26C4EXB refrigerator models are designed to elevate both functionality and style in any kitchen. These models showcase advanced technology and thoughtful design, focusing on user convenience and energy efficiency.

The ED2KVEXVQ and ED2KHAXVQ models emphasize spacious storage with a traditional top-freezer design, providing ample space to organize groceries. They come equipped with adjustable shelves, enabling users to customize their storage to accommodate different items easily. Both models feature Whirlpool's Adaptive Defrost technology, which optimizes the defrost cycle to enhance energy efficiency and maintain food freshness for longer periods.

On the other hand, the GSS26C4XXB and GSF26C4EXW models boast a side-by-side configuration, which provides quick access to both refrigerated and frozen items. This design is not only practical but also aesthetically pleasing. With features like humidity-controlled crispers, these refrigerators help in preserving fruits and vegetables by regulating moisture levels. Furthermore, the built-in ice maker offers the convenience of having ice on hand without the need for manual refills.

The GSF26C4EXB model stands out with its advanced water filtration system, ensuring that the water and ice dispensed are clean and taste-free. Convenience features such as exterior water and ice dispensers make it easy for users to access chilled beverages. Each model is designed with energy efficiency in mind, complying with Energy Star ratings, which signify that they consume less energy compared to standard options.

All these models incorporate noise-reducing technologies that help minimize operational sounds, allowing for a quieter kitchen environment. Moreover, these refrigerators are designed with sleek, modern finishes that enhance any kitchen décor while providing durable and reliable performance.

In summary, the Whirlpool ED2KVEXVQ, ED2KHAXVQ, GSS26C4XXB, GSF26C4EXW, and GSF26C4EXB refrigerators combine functionality, versatility, and modern design. They offer innovative features tailored for food preservation, energy efficiency, and user convenience, making them an ideal choice for any household seeking quality refrigeration solutions.