Whirlpool 9782474A manual Electronic Oven Control

Page 10

ELECTRONIC OVEN CONTROL

1

2

3

4

1.Convection Controls (on convection models only)

2.Self-Clean Control (on self-clean models only)

3.Electronic Display

4.Light Controls (on some models)

To Set:

Before setting, make sure the oven, TIMER and COOK TIME are off.

1.Press CLOCK.

2.Press the HR or MIN “up” or “down” arrow pads (buttons) to set the time of day.

3.Press CLOCK or START.

Tones

Tones are audible signals which indicate that a function has been entered correctly, or when a cycle has ended.

To shut off all tones except the end-of-timer and error tones:

1.Press and hold the STOP TIME button for 5 seconds.

2.A short tone will sound when the tones have been changed. To turn tones back on, repeat step 1.

Display

When power is first supplied to the appliance, everything on the display will light up for 1 to 2 seconds, then a time of day and “PF” will appear. Press OFF to clear “PF” from the display.

If “PF” appears at any other time, a power failure has occurred. Press OFF and reset the clock if needed.

When the oven is in use, the display shows preheat time and the temperature and oven setting.

When the oven is not in use, the display shows the time of day.

When using the TIMER, for settings of 1 to 59 minutes, the display will count down in seconds. For settings 1 hour or over, the display will count down hours and minutes.

When using COOK TIME, the display will show hours and minutes. When using STOP TIME, the display will show minutes and seconds.

3.“Off” will be displayed for 3 seconds when the tones have been turned off, and “ON” will be displayed for 3 seconds when the tones have been turned back on.

To choose between high and low volume tones:

1.Press and hold the DELAY button for 5 seconds.

2.A short tone will sound indicating the tones have been changed.

3.Either “HI” or “Lo” will appear on the display for 3 seconds to show the volume you have chosen.

Timer

The Timer can be set in hours or minutes up to 12 hours and 59 minutes, and counts down the set time.

NOTE:

The Timer does not start or stop the oven.

Start

After setting a function, you must press the START button to start the function. If you do not press the START button within 5 seconds, “START?” will be displayed as a reminder.

Off

The OFF button stops any function except the Clock, Timer and Control Lock. When you press the OFF button, the display will show the time of day, or the time remaining if the TIMER is being used.

Clock

On some models, if you do not want the clock time to be displayed, press and hold the CLOCK pad (button) for 5 seconds. When the clock is not displayed, you can see the time for 5 seconds by pressing the CLOCK pad (button).

To Set:

1.Press TIMER SET.

If no action is taken after one minute, the display will return to the time of day mode.

2.Press the HR or MIN “up” or “down” arrow pads (buttons) to set the length of time.

3.Press START.

If not pressed within 5 seconds, the display will return to the time of day mode and the programmed function will be canceled.

When the set time ends, end-of-cycle tones will sound, then, if on, reminder tones will sound every minute.

4.Press TIMER OFF anytime to cancel the Timer.

Remember, do not press the OFF pad (button) because the oven will turn off.

To display the time of day when the timer is counting down, press

CLOCK.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Use & Care Guide Electric RangesCuisinières Électriques Guide d’utilisation et d’entretienTable DES Matières Range Safety Anti-Tip BracketImportant Safety Instructions For self-cleaning ranges For units with ventilating hoodControl Panel Parts and FeaturesOther Parts and Features RangeCooktop Controls Setting Recommended USECooktop USE ElementsCeramic Glass Use HOT Surface Indicator LightsTo Use Home Canning Cookware CharacteristicsFluorescent Cooktop Light CookwareElectronic Oven Control Control Lock Oven Temperature ControlOven USE Aluminum FoilOven Light BakewareOven Vents BakewareTimed Cooking BakeBroil Convection Bake Broiling ChartConvection Cooking To BroilTo Convection Bake Auto Convection BakingConvection Roast To Convection Auto BakeConvection Broil Convection Roasting ChartTo Convection Broil Self-Cleaning Cycle Range CareCooktop Controls General CleaningExterior Porcelain Enamel Surfaces Control PanelOven Cavity Cooktop Light ReplacementControl Panel Glass Oven and Roasting RacksStorage Drawer Appliance OutletsOven Door Sweep-Thru BaseTroubleshooting Page Sécurité DE LA Cuisinière La bride antibasculementConservez CES Instructions Pour les cuisinières avec programme d’autonettoyage Cuisinière Tableau de commandePièces ET Caractéristiques Autres pièces et caractéristiquesUtilisation DE LA Table DE Cuisson Commandes de la table de cuissonRéglage Utilisation Recommandée ÉlémentsÉlément de pont Sur certains modèles Élément de réchauffageUtilisation de la vitrocéramique UtilisationUstensiles de cuisson Lumière fluorescente de la table de CuissonPréparation de conserves à la maison Témoins lumineux de surface ChaudeMise en marche CommandeAffichage ArrêtHorloge Verrouillage des commandesCommande de température du four Signaux sonoresPositionnement des grilles et des Ustensiles de cuisson Utilisation DU FourPapier d’aluminium GrillesCuisson au four Évents du fourLumière du four Cuisson au four ou rôtissagePréchauffage Cuisson minutéeCuisson au gril Réglage d’une durée de cuissonCuisson au gril variable Cuisson par convectionCuisson au gril Tableau DE Cuisson AU GrilRôtissage par convection Cuisson au four par convectionAutocuisson au four par convection Cuisson au four par convectionTableau DE Rôtissage PAR Convection Cuisson au gril par convectionCuisson au gril par convection Préparation du four Entretien DE LA CuisinièreProgramme d’autonettoyage Comment fonctionne le programmePour arrêter le programme d’autonettoyage à tout moment Nettoyage généralPour différer l’autonettoyage Surfaces Externes EN Émail VitrifiéVitre du tableau de commande Prises pour appareils ménagers Remplacement de la lampe de la Table de cuissonLampe du four Porte du fourTiroir de remisage DépannageBase balayable Laffichage indique des messages Le four ne fonctionne pasLa température du four est trop élevée ou trop basse Le programme dautonettoyage ne fonctionne pas9782474A
Top Page Image Contents