Whirlpool 9782474A manual Control Panel Glass, Cooktop Light Replacement, Oven Cavity

Page 19

OVEN CAVITY

Do not use oven cleaners.

Food spills should be cleaned when oven cools. At high temperatures, foods react with porcelain and staining, etching, pitting or faint white spots can result.

Self-Cleaning cycle:

See “Self-Cleaning Cycle” first.

OVEN AND ROASTING RACKS

Self-Cleaning cycle:

See “Self-Cleaning Cycle” first. Remove racks or they will discolor and become harder to slide. If this happens, a light coating of vegetable oil applied to the rack guides will help them slide.

Steel-wool pad

BROILER PAN AND GRID

Do not clean in the Self-Cleaning cycle.

Mildly abrasive cleanser: Scrub with wet scouring pad.

Solution of ¹₂ cup (125 mL) ammonia to 1 gal. (3.75 L) water:

Soak for 20 minutes, then scrub with scouring or steel-wool pad.

Oven cleaner:

Follow product label instructions.

Porcelain enamel only, not chrome

Dishwasher

STORAGE DRAWER ( on some models)

Make sure drawer is cool and empty before cleaning.

For more information, see “Storage Drawer” section.

Mild detergent

Drawer Liner (on some models)

Remove all stored items from drawer and lift out drawer liner.

Clean with mild detergent.

Control Panel Glass

(on some models)

The control panel glass can be removed for easier cleaning. Do not clean the electronics behind the glass because damage can occur.

To Remove:

1.Remove control knobs by pulling straight out.

2.Release clips.

3.Remove glass by pulling slightly up and forward.

Oven Light

(on some models)

The oven light is a standard 40-watt appliance bulb. It will come on when the oven door is open. It will not work during the Self- Cleaning cycle. On some models, when the oven door is closed, press OVEN LIGHT to turn it on or off.

Before replacing, make sure the oven and cooktop are cool and the control knobs are off.

To replace:

1.Unplug range or disconnect power.

2.Turn the glass bulb cover in the back of the oven counterclockwise to remove.

3.Turn bulb counterclockwise to remove from socket.

4.Replace bulb and bulb cover by turning clockwise.

5.Plug in range or reconnect power.

Cooktop Light Replacement

(on models with fluorescent light,

construction may vary)

To Replace the Fluorescent Light Tube:

1.Unplug range or disconnect power.

2.Lift the cover on top of the control console by lifting the front edge at both ends.

3.Grasp both ends of the fluorescent tube.

4.Turn the tube 90° and lift out of the receptacles.

5.Replace with an F8T5CW type fluorescent tube.

6.Rotate the tube back by 90° to the original position.

7.Plug in range or reconnect power.

19

Image 19
Contents Guide d’utilisation et d’entretien Electric RangesCuisinières Électriques Use & Care GuideTable DES Matières Anti-Tip Bracket Range SafetyImportant Safety Instructions For units with ventilating hood For self-cleaning rangesRange Parts and FeaturesOther Parts and Features Control PanelElements Setting Recommended USECooktop USE Cooktop ControlsCeramic Glass Use HOT Surface Indicator LightsTo Use Cookware Cookware CharacteristicsFluorescent Cooktop Light Home CanningElectronic Oven Control Aluminum Foil Oven Temperature ControlOven USE Control LockBakeware BakewareOven Vents Oven LightTimed Cooking BakeBroil To Broil Broiling ChartConvection Cooking Convection BakeTo Convection Auto Bake Auto Convection BakingConvection Roast To Convection BakeConvection Broil Convection Roasting ChartTo Convection Broil Range Care Self-Cleaning CycleControl Panel General CleaningExterior Porcelain Enamel Surfaces Cooktop ControlsOven and Roasting Racks Cooktop Light ReplacementControl Panel Glass Oven CavitySweep-Thru Base Appliance OutletsOven Door Storage DrawerTroubleshooting Page La bride antibasculement Sécurité DE LA CuisinièreConservez CES Instructions Pour les cuisinières avec programme d’autonettoyage Autres pièces et caractéristiques Tableau de commandePièces ET Caractéristiques CuisinièreÉléments Commandes de la table de cuissonRéglage Utilisation Recommandée Utilisation DE LA Table DE CuissonUtilisation Élément de réchauffageUtilisation de la vitrocéramique Élément de pont Sur certains modèlesTémoins lumineux de surface Chaude Lumière fluorescente de la table de CuissonPréparation de conserves à la maison Ustensiles de cuissonArrêt CommandeAffichage Mise en marcheSignaux sonores Verrouillage des commandesCommande de température du four HorlogeGrilles Utilisation DU FourPapier d’aluminium Positionnement des grilles et des Ustensiles de cuissonCuisson au four ou rôtissage Évents du fourLumière du four Cuisson au fourRéglage d’une durée de cuisson Cuisson minutéeCuisson au gril PréchauffageTableau DE Cuisson AU Gril Cuisson par convectionCuisson au gril Cuisson au gril variableCuisson au four par convection Cuisson au four par convectionAutocuisson au four par convection Rôtissage par convectionTableau DE Rôtissage PAR Convection Cuisson au gril par convectionCuisson au gril par convection Comment fonctionne le programme Entretien DE LA CuisinièreProgramme d’autonettoyage Préparation du fourSurfaces Externes EN Émail Vitrifié Nettoyage généralPour différer l’autonettoyage Pour arrêter le programme d’autonettoyage à tout momentVitre du tableau de commande Porte du four Remplacement de la lampe de la Table de cuissonLampe du four Prises pour appareils ménagersTiroir de remisage DépannageBase balayable Le programme dautonettoyage ne fonctionne pas Le four ne fonctionne pasLa température du four est trop élevée ou trop basse Laffichage indique des messages9782474A