Whirlpool 9782474A manual General Cleaning, Exterior Porcelain Enamel Surfaces, Cooktop Controls

Page 18

4.Press START.

When the start time is reached, the oven will automatically turn on.

When the cycle is complete and the oven cools, “End” will appear on the oven display and “DOOR LOCKED” or “LOCKED” will disappear from the display.

5.Press OFF to clear the oven display.

To Stop Self-Clean any time:

Press OFF. If the oven temperature is too high, the door will remain locked. It will not unlock until the oven cools.

General Cleaning

IMPORTANT: Before cleaning, make sure all controls are off and the oven and cooktop are cool. Always follow label instructions on cleaning products.

Soap, water and a soft cloth or sponge are suggested first unless otherwise noted.

EXTERIOR PORCELAIN ENAMEL SURFACES

(on some models)

Food spills containing acids, such as vinegar and tomato, should be cleaned as soon as the entire appliance is cool. These spills may affect the finish.

Glass cleaner, mild liquid cleaner or nonabrasive scrubbing pad:

Gently clean around the model and serial number plate because scrubbing may remove numbers.

STAINLESS STEEL (on some models)

Do not use soap-filled scouring pads, abrasive cleaners, Cooktop Polishing Creme, steel-wool pads, gritty washcloths or some paper towels. Damage may occur.

Rub in direction of grain to avoid damaging.

Stainless Steel Cleaner & Polish (not included): See “Assistance or Service” section to order.

Liquid detergent or all-purpose cleaner:

Rinse with clean water and dry with soft, lint-free cloth.

Vinegar for hard water spots

CERAMIC GLASS (on some models)

Do not use steel wool, abrasive powder cleansers, chlorine bleach, rust remover or ammonia because damage may occur.

Always wipe with a clean, wet cloth or sponge and dry thoroughly to prevent streaking and staining.

Cooktop Polishing Creme is recommended regularly to help prevent scratches, pitting and abrasions and to condition the cooktop, and can be ordered as an accessory. See “Assistance or Service” to order.

A Cooktop Scraper is also recommended for stubborn soils, and can be ordered as an accessory. See “Assistance or Service” to order. The Cooktop Scraper uses razor blades. Store razor blades out of the reach of children.

Light to moderate soil

Paper towels or clean damp sponge:

Clean while the cooktop is still warm. You may want to wear oven mitts while doing so.

Sugary spills (jellies, candy, syrup)

Cooktop Scraper:

Clean while the cooktop is still warm. You may want to wear oven mitts while doing so.

Cooktop Polishing Creme and clean damp paper towel:

Clean as soon as cooktop has cooled down. Rub creme into surface with a damp paper towel or soft cloth. Continue rubbing until white film disappears.

Heavy soil, dark streaks, specks and discoloration

Cooktop Polishing Creme or nonabrasive cleanser:

Rub product into soil with a damp paper towel or soft cloth. Continue rubbing until white film disappears.

Burned-on soil

Cooktop Polishing Creme and Cooktop Scraper:

Rub creme into soil with damp paper towel. Hold scraper as flat as possible on surface and scrape. Repeat for stubborn spots. Polish entire cooktop with creme and paper towel.

Metal marks from aluminum and copper

Cooktop Polishing Creme:

Clean as soon as cooktop has cooled down. Rub creme into surface with a damp paper towel or soft cloth. Continue rubbing until white film disappears. The marks will not totally disappear but after many cleanings become less noticeable.

Tiny scratches and abrasions

Cooktop Polishing Creme:

Rub creme into surface with a damp paper towel or soft cloth. Continue rubbing until white film disappears. Scratches and abrasions do not affect cooking performance and after many cleanings become less noticeable.

COOKTOP CONTROLS

Do not use steel wool, abrasive cleansers or oven cleaner.

Do not soak knobs.

When replacing knobs, make sure knobs are in the Off position.

On some models, do not remove seals under knobs.

Soap and water or dishwasher:

Pull knobs straight away from control panel to remove.

CONTROL PANEL

Do not use abrasive cleaners, steel-wool pads, gritty washcloths or some paper towels. Damage may occur.

Glass cleaner and soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly on panel.

OVEN DOOR EXTERIOR

Glass cleaner and paper towels or nonabrasive plastic scrubbing pad:

Apply glass cleaner to soft cloth or sponge, not directly on panel.

18

Image 18
Contents Use & Care Guide Electric RangesCuisinières Électriques Guide d’utilisation et d’entretienTable DES Matières Range Safety Anti-Tip BracketImportant Safety Instructions For self-cleaning ranges For units with ventilating hoodControl Panel Parts and FeaturesOther Parts and Features RangeCooktop Controls Setting Recommended USECooktop USE ElementsHOT Surface Indicator Lights Ceramic Glass UseTo Use Home Canning Cookware CharacteristicsFluorescent Cooktop Light CookwareElectronic Oven Control Control Lock Oven Temperature ControlOven USE Aluminum FoilOven Light BakewareOven Vents BakewareBake Timed CookingBroil Convection Bake Broiling ChartConvection Cooking To BroilTo Convection Bake Auto Convection BakingConvection Roast To Convection Auto BakeConvection Roasting Chart Convection BroilTo Convection Broil Self-Cleaning Cycle Range CareCooktop Controls General CleaningExterior Porcelain Enamel Surfaces Control PanelOven Cavity Cooktop Light ReplacementControl Panel Glass Oven and Roasting RacksStorage Drawer Appliance OutletsOven Door Sweep-Thru BaseTroubleshooting Page Sécurité DE LA Cuisinière La bride antibasculementConservez CES Instructions Pour les cuisinières avec programme d’autonettoyage Cuisinière Tableau de commandePièces ET Caractéristiques Autres pièces et caractéristiquesUtilisation DE LA Table DE Cuisson Commandes de la table de cuissonRéglage Utilisation Recommandée ÉlémentsÉlément de pont Sur certains modèles Élément de réchauffageUtilisation de la vitrocéramique UtilisationUstensiles de cuisson Lumière fluorescente de la table de CuissonPréparation de conserves à la maison Témoins lumineux de surface ChaudeMise en marche CommandeAffichage ArrêtHorloge Verrouillage des commandesCommande de température du four Signaux sonoresPositionnement des grilles et des Ustensiles de cuisson Utilisation DU FourPapier d’aluminium GrillesCuisson au four Évents du fourLumière du four Cuisson au four ou rôtissagePréchauffage Cuisson minutéeCuisson au gril Réglage d’une durée de cuissonCuisson au gril variable Cuisson par convectionCuisson au gril Tableau DE Cuisson AU GrilRôtissage par convection Cuisson au four par convectionAutocuisson au four par convection Cuisson au four par convectionCuisson au gril par convection Tableau DE Rôtissage PAR ConvectionCuisson au gril par convection Préparation du four Entretien DE LA CuisinièreProgramme d’autonettoyage Comment fonctionne le programmePour arrêter le programme d’autonettoyage à tout moment Nettoyage généralPour différer l’autonettoyage Surfaces Externes EN Émail VitrifiéVitre du tableau de commande Prises pour appareils ménagers Remplacement de la lampe de la Table de cuissonLampe du four Porte du fourDépannage Tiroir de remisageBase balayable Laffichage indique des messages Le four ne fonctionne pasLa température du four est trop élevée ou trop basse Le programme dautonettoyage ne fonctionne pas9782474A