Garland Convection Microwave Oven installation instructions Performance Recommendations

Page 15

OPERATING INSTRUCTIONS Continued

2.Press the shelf key for the shelf location to be timed (1-6). NOTE: product keys and shelf keys are the same keys.

3.Press the START/CANCEL key to begin the cooking/timing process.

4.When the cooking/timing process is complete for each shelf, an audible “done” signal will sound and the display will indicate which shelf is finished. Example: SH-1

5.To turn off the alarm press the product key with the flashing LED.

EXAMPLE: Two product profiles contain the same cooking temperature, fan speed and are both programmed for flex time – keys  and .

Two trays of product are going to be cooked in the oven at the same time. The first tray will use product key  and will be placed in rack position . The second tray will use product key  and will be placed in rack position . Once the oven display indicates LOAD:

1.Load food product into oven on shelf 2.

2.Press product key 1, then shelf key 2.

3.Press the START/CANCEL key to start cooking on shelf 2.

4.Load food product into oven on shelf 4.

5.Press product key 6, then shelf key 4.

6.Press the START/CANCEL key to start cooking on shelf 4.

7.When product on shelf 2 is finished cooking, an audible alarm will sound and the display will flash DONE, then SH-2 and the product key 1 LED will be flashing.

8.To turn off the alarm, press product key 1.

9.When the product on shelf 4 is finished cooking, an audible alarm will sound and the display will flash DONE, then SH-4 and the product key 6 LED will be flashing.

10.To turn off the alarm, press product key 6.

PERFORMANCE RECOMMENDATIONS

1.Preheat oven thoroughly (approx. 20 minutes) before use.

2.As a general rule, temperature should be reduced 25° to 50° from that used in a standard/convection oven. Cooking time may also be shorter, so we suggest closely checking the first batch of each product prepared.

3.Use the chart of suggested times and temperatures as a guide. These will vary depending upon such factors as size of load, temperature, and mixture of product (particularly moisture) and density of product.

4.Keep a record of the times, temperature, and load sizes you establish for various products. Once you have determined these, they will be similar for succeeding loads.

5.When practical, start cooking the lowest temperature product first and gradually work up to higher temperatures.

6.If you find that your previous temperature setting is more than 10° higher than needed for succeeding loads, COOL DOWN to reach the desired temperature before setting a new cooking temperature.

7.When loading oven, work as quickly as possible to prevent loss of heat.

8.Oven will continue to heat even though the timer goes off. Product should be removed from the oven as soon as possible to avoid over cooking.

9.Center pans on racks and load each shelf evenly to allow for proper air circulation within the cavity.

Part # 1955203 (12/06)

Page 15

Image 15
Contents Installation 1955203 12/06 Table of Contents MCO-ED-10 Dimensions and SPECIFICATIONS, MCO ED/ES 10/2044-1/2 1130mm Dimensions and SPECIFICATIONS, MCO ED/ES 10/20 SIntroduction InstallationElectrical Connections InstallationLights Operating InstructionsModes Fan SpeedOff Modes TemperatureTimer Operating InstructionsController Keys Core Probe Operation Fahrenheit/CelsiusOperating the Controls Cook-N-Hold OperationManual Cooking Setting Setback FeaturePress the same product key 1-9 again PR-3 will be displayed Manual cooking using Cook-N-HoldSet the first cooking temperature using the dial Press START/CANCEL to begin manual cookingVerifying Hold Time Master Cooking Using The Product Keys MasterCooking With The Shelf Timer Master Press the START/CANCEL key to switch between F and CPreheat oven thoroughly approx minutes before use Performance RecommendationsPerformance Recommendations PROBLEM/SOLUTIONSTime Cooking GuideTime in Hours Cook and HoldFan Area Maintenance Cleaning and MaintenanceExterior Cleaning Interior CleaningMotor Care Cleaning and MaintenancePage Page Pour ralenti au est four le quand rôtissage, de ou Ventilateur Le .commande de tableau du DownSuite Nettoyage ET Entretien Moteur Du EntretienVentilateur Du Zone La De Maintenance Nettoyage ET EntretienIntérieur Nettoyage Heures EN Temps Chaud AU Maintien ET CuissonViandes Caisson DE GuidePROBLÈMES/SOLUTIONS ’UTILISATION Recommandations CuireLa de et l’humidité de particulier en produits Suite D’UTILISATION Instructions Au Maintien De Temps Du cationVérifi Pour START/CANCEL toucheMaster Niveau De Minuterie La Avec Cuisson Master ChaudMaster Hold-N-Cook Fonction La De Hold DEL la SET touche la sur AppuyezTemp DEL la SET touche la sur Appuyez Chaud Au Maintien Et CuissonConsigne de point au retour Setback fonction la de RéglageErmiqueTh Sonde La Avec Fonctionnement Fahrenheit/Celsius Commandes Des UtilisationPorte la Avec .porte la d’entrouvrir l’utilisateur à Température Off D’arrêt Mode EnAgechauff le pas commande ne minuterie La Nota MinuterieDémarrage ’UTILISATION InstructionsÉclairage Ventilateur Du VitesseÉlectriques Connexions Suite InstallationLfi de Type Électrique, branchement le commencer de AvantMm 152 po 6 Arrière mm 25 po 1 Côtés Roulettes De Équipées Rôtissoires Des InstallationSignalétique Plaque Dégagements60/50Hz tr/mn, 1725/1440 et 1140/950 10/20 ED/ES MCO SPÉCIFICATIONS, ET Dimensions1791 1/2-70 965 711 610 736 Matière DES Table 12/06 1955203 n Pièce Inc Industries, Commercial Garland