![](/images/new-backgrounds/1088275/8827531x1.webp)
16Setting Surface Controls
Burner locations | Operating single burners | |
|
|
|
2 Standard burners
Large burner
Extra large burner
Perfect Simmer™ burner
1.Push the desired gas surface control knob in and turn counterclockwise out of the OFF position - Fig.1.
2.Release knob and rotate to (lite) position. Visually check that the needed burner has lit.
3.To adjust, push the knob in and turn counter- clockwise to a flame size setting that best fits your need.
Fig. 1