![](/images/new-backgrounds/1088275/88275101x1.webp)
Care and Cleaning 51
Removing and replacing the warmer oven drawer
Electrical Shock Hazard can occur and result in serious injury or death. Disconnect appliance from electric power before cleaning and servicing the warmer oven.
To remove the warmer oven drawer:
1. | Turn powerOFF before removing the warmer | Warmer | |
| oven drawer. | oven |
|
|
| ||
2. | Open the warmer oven drawer completely. | drawer | |
3. | On left warmer oven drawer rail, locate black | handle |
release lever and press up with finger while pulling out slightly on the oven drawer handle. On right warmer oven drawer rail, locate black release lever and press down with finger while pulling out slightly on the warmer oven drawer handle
4.The warmer oven drawer should now be released from the rails. Remove warmer oven
drawer (using level & square motion) |
|
completely away from the appliance. | Fig. 1 |
To replace the warmer oven drawer:
1. Pull the bearing glides to the front of the outer |
| |
compartment glide channels until they snap |
| |
into place |
| |
2. Carefully line up both sides of the warmer oven | ||
drawer glide rails to the outer compartment | ||
| ||
glide channels located inside the empty | ||
warmer oven | ||
| ||
3. While holding the warmer oven drawer level |
| |
and square using the warmer oven drawer | Fig. 2 | |
handle, push (DO NOT FORCE) the warmer | ||
| ||
oven drawer all the way into the outer |
| |
compartment glide channels all the way into |
| |
the range. Pull the warmer oven drawer open |
| |
again to verify the glides have seated. |
| |
4. If you do not hear the levers “click” or the |
| |
bearing glides do not feel seated remove the |
| |
warmer oven drawer and repeat steps "1" |
| |
through "3". This will minimize possible |
| |
damage to the bearing glides. |
|
Fig. 3