Sherwood R-963 manual Universal Remote Controls, Digi Link System Remote Controls

Page 11

Universal Remote Controls

Note: For enhanced Universal Remote Programming instructions and manufacturer’s codes, please refer to the operating manual inclosed with this Universal Remote Control.

This remote control unit has 3 operating modes as follows:

•OSD (On-Screen Display) mode: Allows you to look at information about basic operation of this unit on your monitor TV and to operate this unit by moving an arrow that appears on the screen of your monitor TV.

•Sherwood mode: Allows you to operate this unit and other Sherwood components like cassette decks, CD players, etc.(To operate other Sherwood components, you should make the DIGI LINK connections between them.)

•Non-Sherwood mode: Allows you to operate non-Sherwood audio and video components that are remote compatible.

Notes:

•The setup code for each component must be entered before operation.

•For setup codes(manufacturer’s codes), please refer to “Set-Up Code Table” in the operating manual of this remote control.

•Some operation buttons have different functions according to each operation mode.

•Be sure to set the remote control to the correct mode before operation.

DIGI LINK SYSTEM REMOTE CONTROLS

•This section explains the basic functions for Sherwood or OSD mode. For the non-Sherwood mode, refer to the operating manual of this remote control.

•All Sherwood components bearing the DIGI LINK(II or III) logo can be used with this remote control.

•For system remote control operation, first make the DIGI LINK connections between Sherwood components.

•The numbered buttons on the remote control have different functions in different modes. For details, refer to the “FUNCTION TABLE of the NUMBERED BUTTONS” on the following page.

•In the DIGI LINK III remote control system, if pressing PLAY, etc. on CD player or tape deck, CD or TAPE MONITOR is selected automatically on the receiver without selecting the input source. Then PLAY, etc. starts.

ENGLISH

OSD BUTTON

LCD(FUNCTION) BUTTONS

MAIN BUTTON

Enters the MAIN menu mode

PAGE BUTTON

While displaying the page menu of the

selected device or the FAVORITE channel menu, each time this button is pressed, its page changes

OSD

POWER

OFF

MAIN

AUDIO TV

CD VCR1

DVD VCR2

TAPE SAT

AUX

CABLE

 

 

AUDIO

 

PAGE

MAIN

FAV

 

 

 

CH/

 

 

SET

 

LCD SCREEN

POWER BUTTON

LIGHT BUTTON

Activates the backlighting of the remote control for a specified time(up to 99 sec.) If any other button is pressed while the backlighting is on, the remote control will remain backlit for an additional period.

LCD(FUNCTION)BUTTONS

FAVORITE BUTTON

Enters the Favorite channel mode.

Each time this button is pressed, its page changes.

VOLUME UP/DOWN(+/-) BUTTONS

VOL

CH

 

MUTE

 

 

CHANNEL LEVEL UP/DOWN (+/-) BUTTONS

NUMERIC(1~0) BUTTONS

•For selecting preset stations in tuner mode.

•For selectiog a track or a disc in CD mode, etc.

•When selecting a disc, select disc No.(1~5) within 2 sec.after pressing the DISC button.

MACRO BUTTONS

AUTO

DSP

7.1

SURR

RETURN

STEREO

1 2 3

4 5 6

7 8 9

DISC

ROOM 2

DISP0 ENT

MI M2 M3

CURSOR CONTROL(), ENTER( ) BUTTONS

RNC-500

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 963 Introduction Unpacking and InstallationRead this Before Operating Your Unit Room 2 Remote Controls Should this happen, memorize them again System ConnectionsAudio IN/ OUT connections Connecting System Control Connecting MULTI-ROOM System KIT Connecting Speakers Dynamic Range Button Front Panel ControlsThis remote control unit has 3 operating modes as follows Universal Remote ControlsDigi Link System Remote Controls Function Table of the Numbered Buttons 5V matching the polarity Loading BatteriesRemove the cover Load four alkaline batteries AAA sizeButtons simultaneously for 3 seconds Entering a Setup CodeRepeat the above steps Power button and then save the codeCode is saved and the Pre-PROgramming mode is resumed Operate the component using Corresponding function buttonsFunctions Main Additional Information on Remote Command CodesMatching the polarity Room 2 Remote ControlsBefore operation OperationsSelect the digital or the analog input as Desired When CD, Tape MON or Video 1~ Video 5 is selectedAdjusting the tone bass and treble Select the tone mode as desiredPress it again to cancel, then CINEMA-EQ OFF Surround modes Surround SoundHall 1/2 Use this mode to enjoy video game sourcesFront left and right speakers and center speaker Speaker placementEnjoying Surround Sound Surr Adjusting each channel level with test tone Adjusting each channel levelDownmixing into 2 front channels Listening to Radio Broadcasts Auto tuningManual tuning Presetting radio stationsScanning preset stations in sequence Tuning to preset stationsDubbing from video components onto Dubbing the sound and image signalsRecording Recording with Tape MonitorConnected, Digital is flickering. There Digital Audio Recording with MD RecorderEach time this button is pressed, the corresponding Input is selected as followsCompressing the dynamic range Dolby Digital sources only Operating the sleep timerAdjusting the brightness of the fluorescent displays Other FunctionsCorrecting or clearing a video label Room 2 source Room 2 Source PlaybackCurrent Status Display Using the OSDOSD Menu Settings When selecting the Surround Setup Select the desired menu using the Cursor UP /DOWN buttonsWhen selecting the Power AMP Assign When selecting the Function SelectSetting the Power AMP Assign When selecting the Speaker Config Setting the Speaker SetupWhen selecting the Speaker Distance Corresponding LFE level mode When selecting the LFE Level ControlMoved to the corresponding Digital Setting the Function SelectWhen selecting the Input Setup D E O S E L E C T When selecting the Tone Control Off To turn off the current status display When selecting the OSD ModeWhen the DC Trigger mode is set to On When selecting the DC TriggerWhen selecting the Listening Mode Moved to the corresponding mode Setting the Surround SetupWhen selecting the Source Direct When selecting the Cinema EQWhen selecting the surround mode When selecting the Decoding ModeEach time these buttons are pressed, the channel level can Setting the CH Level TrimBe adjusted within the range of -15~+15 dB When selecting the Volume Mode Setting the ROOM2 Feed SetupButtons to select the Function Select for Room 2 source When selecting the Function Select for RoomPress the Cursor UP /DOWN Then press the Enter button Problem Possible Cause Remedy Troubleshooting GuideAmplifier Section Specifications963

R-963 specifications

The Sherwood R-963 is a standout receiver in the competitive audio equipment landscape, renowned for its blend of traditional craftsmanship and cutting-edge technology. This model exemplifies Sherwood's commitment to high-fidelity sound, making it a popular choice among audiophiles and casual listeners alike.

One of the defining features of the R-963 is its robust power output, delivering 100 watts per channel across a wide frequency range. This ensures that listeners experience rich sound dynamics, whether enjoying quiet acoustic tracks or the thunderous crescendos of orchestral material. The receiver is designed to accommodate a variety of speaker configurations, supporting both 2-channel and multi-channel setups, which allows it to cater to personal preferences and home theater requirements.

The R-963 is equipped with an array of connectivity options, reflecting the demands of modern audio environments. It includes multiple HDMI inputs, allowing seamless connections to a range of devices, from Blu-ray players to gaming consoles. Additionally, the receiver supports 4K passthrough, ensuring high-definition content is transmitted without loss of quality. For those who enjoy streaming, the built-in Bluetooth capability allows wireless music playback from smartphones and tablets, enhancing convenience and flexibility.

Another notable technology in the R-963 is its advanced audio processing features. The receiver utilizes digital signal processing (DSP) to optimize sound quality, enabling users to select various audio modes that enhance music and movie watching experiences. Surround sound capabilities are also integrated, offering immersive audio that replicates a theater-like atmosphere at home.

User-friendly controls and a clear display make the R-963 accessible for all users. The ergonomic remote control allows effortless navigation between functions, settings, and sources, making the operation enjoyable. Additionally, compatibility with multi-room audio systems means that users can enjoy their favorite tunes in various rooms simultaneously.

In summary, the Sherwood R-963 receiver combines powerful performance with versatile connectivity and modern technologies. Its robust build quality, user-friendly interface, and exceptional audio capabilities make it an excellent choice for anyone looking to elevate their listening experience, whether it be through music playback or movie soundtracks.
Top Page Image Contents