Sherwood R-963 manual Listening to Radio Broadcasts, Auto tuning, Manual tuning

ENGLISH

LISTENING TO RADIO BROADCASTS

Auto tuning				Select the desired band.
1	Select the tuner.		2 BAND
				BAND		FREQUENCY
			Each time this button is pressed, the band changes
	AUDIO	OSD	POWER
		OFF	as follows :
		or	FM Stereo mode			FM Mono mode	AM
			(“ STEREO” lights up )		( “ STEREO” goes off)
			When FM stereo broadcasts are poor because of
			weak broadcast signals, select the FM mono mode to
			reduce the noise, then FM broadcasts are reproduced
			in monaural sound.
			When pressing the BAND button without selecting
			the TUNER, the tuner will be selected automatically.
3	Select the tuning mode.		4	Press the TUNING/PRESET UP(			) or
				DOWN(	) button for more than 0.5 second.
		T/P MODE			TUNING/PRESET

Each time this button is pressed, the mode changes		Then “ AUTO” appears on the display. The tuner
as follows:		will now search until a station of sufficient
	Tuning mode : “PRESET” goes off.	strength has been found. The display shows the
	Preset mode : “PRESET” lights up.	tuned frequency and “TUNED”.
		If the station found is not the desired one, simply
		repeat this operation.
		Weak stations are skipped during auto tuning.

Manual tuning

TUNING/PRESET

Manual tuning is useful when you already know the frequency of the desired transmitter.

Perform the steps ~	in “Auto tuning” procedure and press the
TUNING/PRESET UP(	) or DOWN( ) button repeatedly until the right

frequency has been reached.

Presetting radio stations

You can store up to 30 preferred stations in the memory.

1	Tune in the desired station with auto or
	manual tuning.

Press the MEMORY/ENTER button.

2 MEMO/ENTER

“MEMO” is flickering for 5 seconds.

28