ENGLISH
2. CONNECTING VIDEO COMPONENTS
|
|
| (COMPOSITE) OUT |
| ||||
|
|
|
| VIDEO |
| IN |
| |
|
|
|
| HDMI OUT |
|
| ||
|
|
|
|
|
| |||
COMPONENT | AUDIO | AUDIO |
| |||||
| OUT | OUT |
| IN |
| |||
Y CB CR | OUT IN | R L | R |
| L |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VIDEO 1 VIDEO 2 TAPE VIDEO 1 OUT
RL
AUDIO
VIDEO
VIDEO 1 OUT | VIDEO 1 | VIDEO 2 |
|
PR/CR | PB/CB | Y | MONITOR OUT |
PR/CR | PB/CB | Y | VIDEO 2 |
| |||
|
|
| VIDEO 1 |
PR/CR | PB/CB | Y |
|
COMPONENT VIDEO |
VIDEO
| VIDEO 1 | VIDEO 2 |
|
PR/CR | PB/CB | Y | MONITOR OUT |
|
| 2 |
VIDEO2 | PB/CB | VIDEO |
PR/CR | Y |
HDMI IN
(COMPOSITE) IN
COMPONENTVIDEO
IN
Y CB CR | IN |
|
| OUT HDMI |
|
|
| |
|
| OUT (COMPOSITE) |
|
| ||
|
|
| VIDEO | COMPONENT | AUDIO | |
|
| |||||
|
| OUT | OUT | |||
|
| OUT | Y CB CR | L R | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MONITOR OUT |
MONITOROUT |
VIDEO
VIDEO 2
PR/CR | PB/CB | Y | MONITOR OUT |
•The jacks of VIDEO 1 may also be connected to a DVD recorder or other digital video recording component. For details, refer to the operating instructions of the component to be connected.
•The jacks of VIDEO 2 can also be connected to an additional video component such as a cable TV tuner, an LD player or satellite system.
Note :
•When Sherwood DVD player such as
Because, if the PLAY button, etc. is pressed on the DVD player, the VIDEO 2 is automatically selected as an input source on this unit. Then playback, etc. starts.
HDMI(High Definition Multimedia Interface) connection : (*)
•You can connect the source component (DVD player, etc.) to the display component (TV, projector, etc.) through this receiver with using a commercially available HDMI cord.
•The HDMI connection can carry uncompressed digital video signals and digital audio signals.
•This receiver can output digital video and digital audio signals from the MONITOR HDMI OUT of this receiver without passing through any circuits as they were input into the HDMI IN.
•HDMI, the HDMI logo and
Note: Depending on the connected component, unreliable signal transfer may happen. (For details, refer to the operating instruction of your component.)
6