Frigidaire FPES3085KF, FGES3065KF Minimum and Maximum Control PAD Settings, Setting the Clock

Page 20

SETTING OVEN CONTROLS

MINIMUM AND MAXIMUM CONTROL PAD SETTINGS

All of the features listed below have minimum and maximum time or temperature settings that may be entered into the control. An ENTRY acceptance beep will sound each time a control pad is touched (the acceptance beep on the Oven Lockout pad is delayed 3 seconds).

An ENTRY ERROR tone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or above the maximum settings for the feature.

FEATURE

 

MINIMUM TEMP. /TIME MAXIMUM TEMP. /TIME

PREHEAT

 

170°F/77°C

550°F/288°C

BAKE

 

170°F/77°C

550°F/288°C

BROIL

 

400°F/205°C

550°F/288°C

CONVECTION BAKE

 

170°F/77°C

550°F/288°C

CONVECTION ROAST

 

170°F/77°C

550°F/288°C

CONVECTION BROIL

 

400°F/205°C

550°F/288°C

PIZZA

 

170°F/77°C

550°F/288°C

CHICKEN NUGGETS

 

170°F/77°C

550°F/288°C

TIMER

12 Hr. Mode

0:01 Min.

11:59 Hr./Min.

 

24 Hr. Mode

0:01 Min.

11:59 Hr./Min.

CLOCK TIME

12 Hr. Mode

1:00 Hr./Min.

12:59 Hr./Min.

 

24 Hr. Mode

0:00 Hr./Min.

23:59 Hr./Min.

DELAY START

12 Hr. Mode

1:00 Hr./Min.

12:59 Hr./Min.

 

24 Hr. Mode

0:00 Hr./Min.

23:59 Hr./Min.

BAKE TIME

12 Hr. Mode

0:01 Min.

5:59 Hr./Min.

 

24 Hr. Mode

0:01 Min.

5:59 Hr./Min.

SELF CLEAN TIME

 

2 hours

4 hours

SETTING THE CLOCK

The SET CLOCK pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has been interrupted, the timer in the display will flash.

To set the clock (example below for 1:30)

1.Press SET CLOCK. “CLO” will appear in the display.

2.Press 1 3 0 pads to set the time of day to 1:30. “CLO” will stay in the display.

3.Press START. “CLO” will disappear and the clock will start.

CHANGING BETWEEN 12 OR 24 HOUR TIME OF DAY DISPLAY

1.Press and hold SET CLOCK for 6 seconds. “CLO” will appear in the display.

2.CONTINUE holding the pad until “12Hr dAY” or “24Hr dAY” appears in the display and the control beeps once.

3.Press SELF CLEAN to switch between the 12 and 24 hour time of day display. The display will show either “12Hr dAY” or “24Hr dAY”.

4.Press START to accept the change or press CANCEL to reject the change.

5.Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Use &Care Please Carefully Read and Save These Instructions Welcome & CongratulationsRegister Your Product Important Safety Instructions DefinitionsImportant Instructions for Using Your Cooktop Important Safety Instructions for Using Your Oven Important Safety Instructions for Cleaning Your OvenFor Glass Cooktop only Do Not Use Decorative Surface Burner CoversFeatures AT a Glance Model a Your built-in range FeaturesFeatures AT a Glance Model B Features AT a Glance Model C Before Setting Surface Controls Element on & hot surface indicator lightsElement on indicator light location About the ceramic glass cooktopAvailable Esec display settings Esec power failure indicator message PFEsec hot element indicator message HE Esec error indicator message ErUsing proper cookware Cookware material typesSetting Surface Controls Model aTo Operate the Dual Surface Element To Operate the Bridge Surface Element Keep warm zone Models B & C only Before Setting Oven Controls Oven vent locationAir circulation in the oven Arranging oven racksTypes of oven racks Flat handle oven rack Offset oven rackNever pick up hot oven rack parts Effortless oven rack systemTo assemble the Effortless Oven Rack system Setting Oven Controls Control pad featuresTemperature Visual Display Feature and function follow later in this Use & Care GuideMinimum and Maximum Control PAD Settings Setting the ClockFeature Minimum TEMP. /TIME Maximum TEMP. /TIME Changing Between 12 or 24 Hour Time of DAY DisplaySetting Silent Control Operation Setting Continuous Bake or 6 Hour Energy SavingSetting Temperature Display Fahrenheit or Celsius Setting Lockout Feature Setting Minute TimerSetting ADD 1 Minute Feature some models Setting Quick or Powerplustm Preheat Setting BakeTo set the Preheat temperature for 375F To set the Bake Temperature to 375FBenefits of Convection Bake Setting Convection BakeConvection Baking Tips Setting Convection Convert Setting Convection RoastTo set a Convection Roast Temperature of 375F Convection Roasting TipsSetting Convection Broil some models To set a Convection Broil Temperature of 500FConvection Broiling Tips Electric Oven Convection Broiling Table RecommendationsSetting Bake Time Setting Delay StartWhen the timed bake finishes BAKE, Convection BAKE, Bake Time and DelaySetting Keep Warm Setting Pizza some modelsDelayed Bake Time CancelSetting Chicken Nuggets Setting MY Favorite some modelsSetting Broil Broiling TipsElectric Oven Broiling Table Recommendations To set a Broil of 500FSetting the Sabbath Feature for use on Adjusting Oven Temperature To adjust the oven temperature higherTo adjust the oven temperature lower Oven LightWhat to Expect during Cleaning SELF-CLEANINGAdhere to the following cleaning precautions Stopping or Interrupting a Self-Cleaning Cycle Setting SELF-CLEAN Cycle Time LengthWhen the Self-Clean Cycle is Completed Keep warm drawer temperature selection Keep warm drawer rack positionsOperating the keep warm drawer To set the keep warm drawer controlsCare & Cleaning Cleaning Chart Cleaning various parts of your applianceCare & Cleaning Ceramic glass cooktop cleaning & maintenanceCleaning recommendations for the ceramic glass cooktop For light to moderate soilCare and cleaning of stainless steel Removing and replacing the lift-off oven doorTo remove the hidden bake cover some models Changing oven lightBe Sure Oven is Cool To Replace the Light BulbTo remove and replace keep warm drawer some models Oven baking Possible CAUSE/SOLUTION Surface units too hot or not hot enoughDrip bowls are Pitting or rustingOccurrence Disclaimer of Implies Warranties Limitation of Remedies Major Appliance WarrantyExclusions This warranty does not cover the following
Related manuals
Manual 5 pages 18.45 Kb
Top Page Image Contents