Frigidaire FPES3085KF, FGES3065KF, FGES3065KB, FGES3045KF Setting SELF-CLEAN Cycle Time Length

Page 34

SETTING OVEN CONTROLS

SETTING SELF-CLEAN CYCLE TIME LENGTH

The SELF CLEAN pad controls the Self-Cleaning feature. If you are planning to use the oven directly after a self-clean cycle remember to allow time for the oven to cool down and the oven door to unlock. This normally takes about one hour. So a 3 hour self-clean cycle will actually take about 4 hours to complete.

*It is recommend to use a 2 hour self-clean cycle for light soils, a 3 hour cycle for average soils, and a 4 hour cycle for heavy soils (to assure satisfactory results).

To set the controls for a 3 hour Self-Cleaning cycle

to start immediately and shut off automatically

1.Be sure the clock is set with the correct time of day and the oven door is closed.

2.Press SELF CLEAN. “CLn” and “3:00” HR will show in the display. The control will automatically clean for a 3 hour period (default self-cleaning cycle time).

NOTE

If a 2 or 4 hour clean time is desired, press SELF CLEAN multiple times to toggle between 2, 3 or 4 hours.

3.Press START. “door Loc” will appear, a beep will sound and the “DOOR” and icon will flash; the letters “CLn” will remain on in the display.

4.As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the door has been locked the “DOOR” indicator light and icon will stop flashing and remain on. Also, the oven

icon will appear in the display.

NOTE

Allow about 15 seconds for the oven door lock to close.

When the Self-Clean Cycle is Completed

1. “HOT” will appear in the display. The time of day, the “DOOR” and icon will remain in the display.

2.Once the oven has cooled down for approximately 1 HOUR, “door OPn” will appear and the “DOOR” and icon will flash until the door is unlocked, the oven door can then be opened and the timer will revert back

to the time of the day.

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fire in the oven:

1.Press CANCEL.

2.The oven door can only be opened after the oven has cooled down for approximately 1 HOUR, “door OPn”

will appear and the “DOOR” and icon will flash until the door is unlocked, the oven door can then be opened and the timer will revert back to the time of the day.

The SELF CLEAN and DELAY START pads controls the Delayed Self-Clean operation. The automatic timer will turn the oven on and off at the time you select in advance.

To set the control for the Self-Cleaning Cycle to start at a delayed time and shut off automatically (example: 3 hour self-clean cycle to start at 4:30)

1.Be sure the clock is set with the correct time of day and the oven door is closed.

2.Press SELF CLEAN. “CLn” and “3:00” HR will show in the display. The control will automatically clean for a 3 hour period.

NOTE

If a 2 or 4 hour clean time is desired, press SELF CLEAN multiple times to toggle between 2, 3 or 4 hours.

3.Press START. “door Loc” will appear, a beep will sound and the “DOOR” and icon will flash; the letters “CLn” will appear in the display as soon as the door is locked.

4.As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the door has

been locked the “DOOR” and icon indicator light will quit flashing and remain on.

5.Press DELAY START. Enter the desired start time using the number pads 4 3 0.

6. Press START. “DELAY”, “DOOR” and icon icons will remain on.

7.The control will start the self-cleaning at the set start time, for the period of time previously selected. At that time, the icon “DELAY” will go out; “CLn” and oven icon will appear in the display.

When the Self-Clean Cycle is Completed

1. “HOT” will appear in the display. The time of day, the “DOOR” and icon will remain in the display.

2.Once the oven has cooled down for approximately 1 HOUR, “door OPn” will appear and the “DOOR” and icon will flash until the door is unlocked, the oven door can then be opened and the timer will revert back

to the time of the day.

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fire in the oven:

1.Press CANCEL.

2.The oven door can only be opened after the oven has cooled down for approximately 1 HOUR, “door OPn”

will appear and the “DOOR” and icon will flash until the door is unlocked, the oven door can then be opened and the timer will revert back to the time of the day.

NOTE

Models B & C only, during self-clean cycle surface elements can not be used (see ESEC Lockout Feature)

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Use &Care Register Your Product Welcome & CongratulationsPlease Carefully Read and Save These Instructions Important Safety Instructions DefinitionsImportant Instructions for Using Your Cooktop For Glass Cooktop only Important Safety Instructions for Using Your OvenImportant Safety Instructions for Cleaning Your Oven Do Not Use Decorative Surface Burner CoversFeatures AT a Glance Model a Your built-in range FeaturesFeatures AT a Glance Model B Features AT a Glance Model C Element on indicator light location Before Setting Surface ControlsElement on & hot surface indicator lights About the ceramic glass cooktopEsec hot element indicator message HE Available Esec display settingsEsec power failure indicator message PF Esec error indicator message ErUsing proper cookware Cookware material typesSetting Surface Controls Model aTo Operate the Dual Surface Element To Operate the Bridge Surface Element Keep warm zone Models B & C only Air circulation in the oven Before Setting Oven ControlsOven vent location Arranging oven racksTypes of oven racks Flat handle oven rack Offset oven rackTo assemble the Effortless Oven Rack system Effortless oven rack systemNever pick up hot oven rack parts Temperature Visual Display Setting Oven ControlsControl pad features Feature and function follow later in this Use & Care GuideFeature Minimum TEMP. /TIME Maximum TEMP. /TIME Minimum and Maximum Control PAD SettingsSetting the Clock Changing Between 12 or 24 Hour Time of DAY DisplaySetting Temperature Display Fahrenheit or Celsius Setting Continuous Bake or 6 Hour Energy SavingSetting Silent Control Operation Setting ADD 1 Minute Feature some models Setting Minute TimerSetting Lockout Feature To set the Preheat temperature for 375F Setting Quick or Powerplustm PreheatSetting Bake To set the Bake Temperature to 375FConvection Baking Tips Setting Convection BakeBenefits of Convection Bake To set a Convection Roast Temperature of 375F Setting Convection ConvertSetting Convection Roast Convection Roasting TipsConvection Broiling Tips Setting Convection Broil some modelsTo set a Convection Broil Temperature of 500F Electric Oven Convection Broiling Table RecommendationsWhen the timed bake finishes Setting Bake TimeSetting Delay Start BAKE, Convection BAKE, Bake Time and DelayDelayed Bake Time Setting Keep WarmSetting Pizza some models CancelSetting Chicken Nuggets Setting MY Favorite some modelsElectric Oven Broiling Table Recommendations Setting BroilBroiling Tips To set a Broil of 500FSetting the Sabbath Feature for use on To adjust the oven temperature lower Adjusting Oven TemperatureTo adjust the oven temperature higher Oven LightAdhere to the following cleaning precautions SELF-CLEANINGWhat to Expect during Cleaning When the Self-Clean Cycle is Completed Setting SELF-CLEAN Cycle Time LengthStopping or Interrupting a Self-Cleaning Cycle Operating the keep warm drawer Keep warm drawer temperature selectionKeep warm drawer rack positions To set the keep warm drawer controlsCare & Cleaning Cleaning Chart Cleaning various parts of your applianceCleaning recommendations for the ceramic glass cooktop Care & CleaningCeramic glass cooktop cleaning & maintenance For light to moderate soilCare and cleaning of stainless steel Removing and replacing the lift-off oven doorBe Sure Oven is Cool To remove the hidden bake cover some modelsChanging oven light To Replace the Light BulbTo remove and replace keep warm drawer some models Oven baking Drip bowls are Possible CAUSE/SOLUTIONSurface units too hot or not hot enough Pitting or rustingOccurrence Exclusions This warranty does not cover the following Major Appliance WarrantyDisclaimer of Implies Warranties Limitation of Remedies
Related manuals
Manual 5 pages 18.45 Kb
Top Page Image Contents