SETTING OVEN CONTROLS
SETTING MINUTE TIMER
The TIMER ON.OFF pad controls the Minute Timer feature. The Minute Timer serves as an extra timer in the kitchen that will beep when the set time has run out. It does not start or stop cooking. The Minute Timer feature can be used during any of the other oven control functions. Refer to “Minimum and Maximum Control Pad Settings” for time amount settings.
To set the Minute Timer (example for 5 minutes)
1.Press TIMER ON.OFF.
2.Press the number pads to set the desired time in the display.
3.Press START. The time will begin to count down with “5:00” and “Timer” will stay in the display.
Note: If START is not pressed the timer will return to the time of day after 25 seconds.
4.When the set time has run out, “End” and “Timer” will show in the display. The clock will sound with 3 beeps every 5 seconds until TIMER ON.OFF is pressed.
To cancel the Minute Timer before the set time has run out
1.Press TIMER ON.OFF. The display will return to the time of day.
SETTING ADD 1 MINUTE FEATURE (some models)
The ADD 1 MINUTE pad is used to set the Add 1 Minute feature. When the ADD 1 MINUTE pad is pressed, 1 minute is added to the Minute Timer feature if this feature is already active. If the Minute Timer feature is not active and the ADD 1 MINUTE pad is pressed, the Minute Timer feature will become active and will begin counting down from 1 minute.
SETTING LOCKOUT FEATURE
The pad controls the Lockout feature. The Lockout feature automatically locks the cooktop controls, the oven door and prevents the oven from being turned on. It does not disable the clock, Minute Timer or the interior oven lights.
To activate the Oven Lockout feature
1.Press and hold for 3 seconds.
2.After 3 seconds “door Loc” will appear in the oven control display, a beep will sound and “DOOR” and will flash in the display. Once the oven door is locked the “DOOR” and indicators will stop flashing and remain on along with the “Loc”.
To reactivate normal oven operation:
1. Press and hold |
| for 3 seconds. After 3 seconds “door |
| ||
|
OPn” will appear and a beep will sound. The “DOOR”
and will flash in the display until the oven door has
completely unlocked.
2. The oven is again fully operational.
NOTE
Models B & C only, during lockout feature surface elements can not be used (see ESEC Lockout Feature)
22