GE JBP76, JBP63, JBP77 Is on when you, Want to cook, A number, Flash in the display, Power outage

Customer Service Troubleshooting Tips Installation Instructions Operating Instructions Safety Information

Before you call for service…

Troubleshooting Tips

Problem	Possible Causes	What To Do
LATCH DOOR light	The oven door was	• Turn the Oven
is on when you	accidentally locked.	Temperature knob to OFF.
want to cook		Allow the oven to cool.
		Never force the door
		latch handle.
“F—and a number”	You have a function	• If a function error code
flash in the display	error code.	appears during the self-
		cleaning cycle, check the
		oven door latch. The latch
		may have been moved, even
		if only slightly, from the
		locked position. Make sure
		the latch is moved to the
		right as far as it will go. Turn
		the Oven Temperature
		knob to OFF. Allow the
		oven to cool for one hour.
		Put the oven back into
		operation.
		• Disconnect all power to
		the range for 5 minutes
		and then reconnect power.
		If the function error code
		repeats, call for service.
Power outage	Power outage or surge.	• Some models will
		automatically resume their
		setting once the power is
		restored. On models with a
		clock, you must reset the

clock. If the oven was in use, you must reset it by turning the Oven Temperature knob back to OFF, setting the clock and resetting any cooking function.

46