GE 49-8726, 164D2966P238 warranty Self-Cleaning Oven

Page 4

IMPORTANT SAFETY INSTRUCTIONS

(continued)

•For your safety, never use your appliance for warming or heating the room.

•DO NOT STORE OR USE COMBUSTIBLE MATERIALS, GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.

•Keep the hood and grease filters clean to maintain good venting and to avoid grease fires.

•Do not let cooking grease or other flammable materials accumulate in or near the range.

• Do not use water on grease fires. Never pick up a flaming pan.

Turn the controls off. Smother a flaming pan on a surface unit by covering the pan completely with a well-fitting lid, cookie sheet or flat tray. Use a multi-purpose dry chemical or foam-type extinguisher.

Flaming grease outside a pan can be put out by covering it with baking soda or, if available, by using a multi-purpose dry chemical or foam- type fire extinguisher.

Flame in the oven can be smothered completely by closing the oven door and turning the oven off or by using a multi-purpose dry chemical or foam- type fire extinguisher.

•Do not touch the surface units, the heating elements or the interior surface of the oven.

Oven

•Stand away from range when opening the oven door. Hot air or steam which escapes can cause burns to hands, face and/or eyes.

•Do not heat unopened food containers. Pressure could build up and the container could burst, causing an injury.

•Keep the oven vent duct unobstructed.

• Keep the oven free from grease buildup.

•Place the oven shelf in desired position while the oven is cool. If shelves must be handled when hot, do not let pot holder contact the heating elements.

•Pulling out the shelf to the shelf stop is a convenience in lifting heavy foods. It is also a precaution against burns from touching hot surfaces of the door or oven walls.

•When using cooking or roasting bags in the oven, follow the manufacturer’s directions.

•Do not use your oven to dry newspapers. If overheated, they can catch fire.

•Do not use oven for a storage area. Items stored in an oven can ignite.

•Do not leave paper products, cooking utensils or food in the oven when not in use.

These surfaces may be hot enough to burn even though they are dark in color. During and after use, do not touch, or let clothing or other flammable materials contact surface units, areas nearby surface units or any interior area of the oven; allow sufficient time for cooling first.

Potentially hot surfaces include the cooktop, areas facing the cooktop, oven vent opening, surfaces near the opening, crevices around the oven door and metal trim parts above the door.

Remember: The inside surface of the oven may be hot when the door is opened.

•When cooking pork, follow the directions exactly and always cook the meat to an internal temperature of at least 170°F. This assures that, in the remote possibility that trichina may be present in the meat, it will be killed and the meat will be safe to eat.

Self-Cleaning Oven

•Do not clean the door gasket. The door gasket is essential for a good seal. Care should be taken not to rub, damage or move the gasket.

•Do not use oven cleaners. No commercial oven cleaner or oven liner protective coating of any kind should be used in or around any part of the oven. Residue from oven cleaners will damage the inside of the oven when the self-clean cycle is used.

•Clean only parts listed in this Use and Care Guide.

•Before self-cleaning the oven, remove the broiler pan, grid and other cookware.

•Be sure to wipe up excess spillage before starting the self-clean cycle.

•If the self-cleaning mode malfunctions, turn the oven off and disconnect the power supply. Have it serviced by a qualified technician.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents UseandCare& Installation Guide If YOU Need SERVICE… Help US Help YOU…Important Safety Instructions Read all instructions before using this applianceSelf-Cleaning Oven OvenSave These Instructions Cooktop and Radiant Surface UnitsFeatures of Your Range JBP63Automatic Oven Light Switch Oven Interior Light ExplainedStorage Drawer Anti-Tip Device Broil Element Oven Door LatchHOW does this Cooktop Compare To Your OLD ONE? Type of Cooktop Description How It Works RadiantHot Surface Indicator Light General Information About Radiant Surface UnitsHow to Set the Controls Cooking Guide for Using Heat SettingsSurface unit on indicator light will glow Surface ControlsSurface Cookware Tips Types of CookwareCopper Bottom Porcelain/enamelHow to Check Pan Performance Special Cautions for Glass CooktopsHome Canning Tips Observe the Following Points in CanningCanning should be done on the cooktop only Flat-bottomed canners are required for glass cooktopsGlass Cooktop Cleaning Glass Cooktop CleaningFor normal, light soil For heavy, burned on soilAutomatic Timers and Clock Minute TimerTo Set the Minute Timer Questions and AnswersUsing Your Oven Before Using Your OvenOven Controls Oven ShelvesShelf Positions Oven LightBaking How to Set Your Range for BakingType of Food Shelf Position Pan Placement PreheatingBaking Pans Baking GuidesPies CakesAluminum Foil Don’t PeekHow to Set Immediate Start and Automatic Stop How to Time BakeTimed Baking How to Set Delay Start and Automatic Stop Adjust the Oven Thermostat To Adjust the ThermostatRoasting Use of Aluminum FoilRoasting Guide Why is my roast crumbling when I try to carve it?Frozen Roasts Broiling Why are my meats not turning out as brown as they should?Should I salt the meat before broiling? Broiling Guide Oven door should be open to the broil stop positionBefore a Clean Cycle Operating the SELF-CLEANING OvenNormal Cleaning Time 3 hours Quick Reminder To Stop a Clean Cycle How to Set the Oven for CleaningSelf After a Clean Cycle Should there be any odor during the cleaning?Why do I have ash left in my oven after cleaning? My oven shelves do not slide easily. What is the matter?Care and Cleaning Oven Light ReplacementTo remove To replace coverDo not clean the bake element or the broil element Lift-Off Oven DoorOven Heating Elements Inside of the doorBroiler Pan and Grid Control Panel and Knobs Oven VentMetal Parts Painted SurfacesInstallation Instructions Before YOU BeginStep Step Wire Power Cord Installation Step Wire Conduit Installation Step Final Check QUESTIONS? USE this Problem Solver Problem Possible CauseProblem Solver Problem Solver SELF-CLEANWe’ll Be There Warranty

164D2966P238, 49-8726 specifications

The GE 49-8726,164D2966P238 is a high-performance component designed for various industrial applications, showcasing advanced technologies and engineering excellence. This product is a testament to General Electric’s commitment to innovation and reliability in the field of electrical equipment.

At its core, the GE 49-8726,164D2966P238 is engineered to provide superior performance in a compact form factor, making it suitable for a variety of demanding environments. One of the most notable features of this product is its robust construction. Built with high-quality materials, it offers excellent durability and resistance to harsh conditions. This makes it ideal for use in industries such as manufacturing, energy, and transportation.

The device incorporates state-of-the-art technologies that enhance its functionality and efficiency. One of the key technologies used in the GE 49-8726,164D2966P238 is advanced thermal management, which ensures optimal operating temperatures, even under heavy loads. This feature significantly reduces the risk of overheating, thereby prolonging the lifespan of the component and ensuring consistent performance.

Another critical characteristic of the GE 49-8726,164D2966P238 is its adaptability. It can be integrated into various systems without the need for extensive modifications, providing flexibility in installation. This enables businesses to streamline their operations and minimize downtime, as the component can be easily replaced or upgraded.

In terms of electrical performance, the GE 49-8726,164D2966P238 boasts impressive specifications, including high wattage ratings and low power consumption. This not only enhances energy efficiency but also reduces operational costs, making it a cost-effective solution for enterprises looking to enhance their productivity without compromising on quality.

Safety is also a paramount consideration in the design of the GE 49-8726,164D2966P238. It includes various safety features that comply with industry standards, ensuring safe operations in potentially hazardous environments. These features protect both the equipment and the personnel involved in its operation.

In conclusion, the GE 49-8726,164D2966P238 stands out as a top-tier component characterized by its advanced technologies, robust construction, and exceptional performance. Its versatility and reliability make it an excellent choice for industries that demand high-quality solutions for their operational needs.
Top Page Image Contents