GE 164D2966P238 warranty Surface Cookware Tips, Types of Cookware, Copper Bottom, Porcelain/enamel

Page 11

SURFACE COOKWARE TIPS

Types of Cookware

The following information will help you choose cookware which will give good performance.

Stainless Steel: highly recommended

Especially good with a sandwich clad bottom. The sandwich bottom combines the benefits of stainless steel (appearance, durability and stability) with the advantages of aluminum or copper (heat conduction, even heat distribution).

Aluminum: heavy weight recommended

Good conductivity. Aluminum residues sometimes appear as scratches on the cooktop, but can be removed if cleaned immediately. Because of its low melting point, thin weight aluminum should not be used.

Cast Iron: usable, but not recommended Poor performance. May scratch the surface.

Copper Bottom:

Good performance, but copper may leave residues which can appear as scratches. The residues can be removed, as long as the cooktop is cleaned immediately. However, do not let these pots boil dry. Overheated metal can bond to glass cooktops.

An overheated copper pot will leave a residue that will permanently stain the cooktop.

Porcelain/enamel:

Good performance only with a thick, flat, smooth bottom. Avoid boiling dry, as porcelain can melt and fuse to the surface.

Glass-ceramic:usable, but not recommended Poor performance. May scratch the surface.

Stoneware: usable, but not recommended Poor performance. May scratch the surface.

Surface Controls

• Place only dry pans on the surface units. Do not place lids on the surface units, particularly wet lids.

• We recommend that you use only a flat-bottomed wok. They are available at your

local retail store. The bottom

of the wok should have the same diameter as the surface unit to insure proper contact.

• Do not use woks that have support rings. This type of wok will not heat on glass cooktops.

•Some special cooking procedures require specific cookware such as pressure cookers, deep fat fryers, etc. All cookware must have flat bottoms and be the correct size.

(continued next page)

Surface Cookware Tips

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents UseandCare& Installation Guide Help US Help YOU… If YOU Need SERVICE…Read all instructions before using this appliance Important Safety InstructionsOven Self-Cleaning OvenCooktop and Radiant Surface Units Save These InstructionsJBP63 Features of Your RangeBroil Element Oven Door Latch Automatic Oven Light Switch Oven Interior LightExplained Storage Drawer Anti-Tip DeviceType of Cooktop Description How It Works Radiant HOW does this Cooktop Compare To Your OLD ONE?General Information About Radiant Surface Units Hot Surface Indicator LightSurface Controls How to Set the ControlsCooking Guide for Using Heat Settings Surface unit on indicator light will glowPorcelain/enamel Surface Cookware TipsTypes of Cookware Copper BottomSpecial Cautions for Glass Cooktops How to Check Pan PerformanceFlat-bottomed canners are required for glass cooktops Home Canning TipsObserve the Following Points in Canning Canning should be done on the cooktop onlyFor heavy, burned on soil Glass Cooktop CleaningGlass Cooktop Cleaning For normal, light soilQuestions and Answers Automatic Timers and ClockMinute Timer To Set the Minute TimerOven Shelves Using Your OvenBefore Using Your Oven Oven ControlsOven Light Shelf PositionsType of Food Shelf Position How to Set Your Range for BakingBaking Baking Guides Pan PlacementPreheating Baking PansDon’t Peek PiesCakes Aluminum FoilTimed Baking How to Time BakeHow to Set Immediate Start and Automatic Stop How to Set Delay Start and Automatic Stop To Adjust the Thermostat Adjust the Oven ThermostatUse of Aluminum Foil RoastingFrozen Roasts Why is my roast crumbling when I try to carve it?Roasting Guide Should I salt the meat before broiling? Why are my meats not turning out as brown as they should?Broiling Oven door should be open to the broil stop position Broiling GuideNormal Cleaning Time 3 hours Quick Reminder Operating the SELF-CLEANING OvenBefore a Clean Cycle Self How to Set the Oven for CleaningTo Stop a Clean Cycle My oven shelves do not slide easily. What is the matter? After a Clean CycleShould there be any odor during the cleaning? Why do I have ash left in my oven after cleaning?To replace cover Care and CleaningOven Light Replacement To removeInside of the door Do not clean the bake element or the broil elementLift-Off Oven Door Oven Heating ElementsBroiler Pan and Grid Painted Surfaces Control Panel and KnobsOven Vent Metal PartsBefore YOU Begin Installation InstructionsStep Step Wire Power Cord Installation Step Wire Conduit Installation Step Final Check Problem Possible Cause QUESTIONS? USE this Problem SolverProblem Solver SELF-CLEAN Problem SolverWe’ll Be There Warranty

164D2966P238, 49-8726 specifications

The GE 49-8726,164D2966P238 is a high-performance component designed for various industrial applications, showcasing advanced technologies and engineering excellence. This product is a testament to General Electric’s commitment to innovation and reliability in the field of electrical equipment.

At its core, the GE 49-8726,164D2966P238 is engineered to provide superior performance in a compact form factor, making it suitable for a variety of demanding environments. One of the most notable features of this product is its robust construction. Built with high-quality materials, it offers excellent durability and resistance to harsh conditions. This makes it ideal for use in industries such as manufacturing, energy, and transportation.

The device incorporates state-of-the-art technologies that enhance its functionality and efficiency. One of the key technologies used in the GE 49-8726,164D2966P238 is advanced thermal management, which ensures optimal operating temperatures, even under heavy loads. This feature significantly reduces the risk of overheating, thereby prolonging the lifespan of the component and ensuring consistent performance.

Another critical characteristic of the GE 49-8726,164D2966P238 is its adaptability. It can be integrated into various systems without the need for extensive modifications, providing flexibility in installation. This enables businesses to streamline their operations and minimize downtime, as the component can be easily replaced or upgraded.

In terms of electrical performance, the GE 49-8726,164D2966P238 boasts impressive specifications, including high wattage ratings and low power consumption. This not only enhances energy efficiency but also reduces operational costs, making it a cost-effective solution for enterprises looking to enhance their productivity without compromising on quality.

Safety is also a paramount consideration in the design of the GE 49-8726,164D2966P238. It includes various safety features that comply with industry standards, ensuring safe operations in potentially hazardous environments. These features protect both the equipment and the personnel involved in its operation.

In conclusion, the GE 49-8726,164D2966P238 stands out as a top-tier component characterized by its advanced technologies, robust construction, and exceptional performance. Its versatility and reliability make it an excellent choice for industries that demand high-quality solutions for their operational needs.
Top Page Image Contents