GE JCB910, JCB920 owner manual Location

Page 43

Read these instructions completely and carefully.

WARNING! ANTI-TIP DEVICE

All ranges can tip and injury could result.

To prevent accidental tipping of the range, attach an approved Anti-Tip device to the wall. (See Installing the Anti-Tip Device in this section.) To check if the device is installed and engaged properly, carefully tip the range forward. The Anti-Tip device should engage and prevent the range from tipping over.

If you pull the range out from the wall for any reason, make sure the Anti-Tip device is engaged when you push the range back against the wall.

For your safety, never use your range for warming or heating the room. Your oven and cooktop are not designed to heat your kitchen. Top burners should not be operated without cookware on the grate. Such abuse could result in fire and damage to your range and will void your warranty.

Do not store or use combustible materials, gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Explosions or fires could result.

Do not use oven for a storage area. Items stored in the oven can ignite.

Do not let cooking grease or other flammable materials accumulate in or near the range.

LOCATION

Do not locate the range where it may be subject to strong drafts. Any openings in the floor or wall behind the range should be sealed. Make sure the openings around the base of the range that supply fresh air for combustion and ventilation are not obstructed by carpeting or woodwork.

Safety Instructions Operating Instructions Installation Instructions

Your range, like many other household items, is heavy and can settle into soft floor coverings such as cushioned vinyl or carpeting. Use care when moving the range on this type of flooring. It is recommended that the following simple and inexpensive instructions be followed to protect your floor.

The range should be installed on a sheet of plywood (or similar material). When the floor covering ends at the front of the range, the area that the range will rest on should be built up with plywood to the same level or higher than the floor covering.

This will allow the range to be moved for cleaning or servicing. Also, make sure your floor covering will withstand 180°F. (See the Installation Safety Instructions section.)

Make sure the wall coverings around your range can withstand the heat generated (up to 200°F.) by the range. (See the Installation Safety Instructions section.)

Troubleshooting Tips

IMPORTANT!

Remove all tape and packaging. Make sure the burners are properly seated and level. Take the accessory pack out of the oven.

Check to be sure that no range parts have come loose during shipping.

43

Customer Service

Image 43
Contents Convection ANTI-TIP Device Customer ServiceTwo easy ways to register your appliance GE & You, a Service PartnershipStaple sales slip or cancelled check here Write the model and serial numbers hereAll ranges can tip and injury could result Important Safety NoticeSafety Instructions Surface Burners Operating Instructions Installation Instructions Troubleshooting Tips Customer ServiceTips Installation Instructions Operating Instructions ServiceCustomer Instructions Operating Using the gas surface burnersSafety Customer ServiceWok This Way Troubleshooting Tips Installation InstructionsTop-of-Range Cookware Stove Top GrillsAbout the glass surface on some models… Using the electric glass top warming zone on some modelsInstructions Operating Instructions Installation Instructions Troubleshooting TipsOven Control, Clock and Timer Features and Settings Using the oven controlsHour Shut-Off Special features of your oven controlSafety Instructions Fahrenheit or Celsius Temperature SelectionControl Lockout on some models Installation InstructionsTroubleshooting TipsTroubleshooting Tips Customer Service Safety InstructionsInstallation Instructions Operating Using the ovenTroubleshooting Tips Aluminum Foil Troubleshooting TipsHow to Set the Oven for Baking or Roasting Preheating and Pan PlacementHI Broil Troubleshooting Tips Installation Instructions OperatingHow to Set the Oven for Broiling Broiling GuideInstructions Operating Instructions Installation Using the clock and timerHow to Set a Delayed Start and Automatic Stop Using the timed baking and roasting featuresTroubleshooting Tips Installation How to Set an Immediate Start and Automatic StopHow to Set the Oven For Roasting When Using the Probe Using the probe on some modelsConvection Roast Using the convection ovenInstallation Instructions Operating Instructions Safety Convection BakeMulti-Shelf Baking How to Set the Oven for Convection Baking or RoastingPaper and Plastic Metal and GlassTouch the Convection Roast pad Troubleshooting Tips Installation InstructionsMeats Convection Roasting GuideTroubleshooting Tips Installation Using the timed features for convection bakingTouch the Convection Bake pad To Adjust the Thermostat Adjust the oven thermostat-Do it yourselfInstructions Troubleshooting Tips Customer Service Safety InstructionsPan Using the electric warming drawerWhen Using the Warming Drawer Control KnobTo Warm Serving Bowls and Plates Instructions Operating Instructions InstallationTemperature Selection Chart To Crisp Stale ItemsBefore a Clean Cycle Using the self-cleaning ovenHow to Set the Oven for Cleaning How to Delay the Start of Cleaning After a Clean CycleBurner Heads Care and cleaning of the rangeTroubleshooting Tips Installation Sealed Burner Assemblies-porcelain cooktop modelsInstallation Instructions Troubleshooting Tips Customer ServiceSealed Burner Assemblies-glass cooktop models Cooktop Surface on porcelain cooktop models Burner GratesFor porcelain cooktop models only For Heavy, Burned-On Soil… Cleaning the glass cooktop surface on some modelsNormal Cleaning Installation Instructions TroubleshootingBroiler Pan and Grid Troubleshooting TipsLift-Off Oven Door Oven BottomTo remove the warming drawer Warming Drawer RackWarming Drawer Pan Removable Warming DrawerUpper Control Panel Instructions Safety InstructionsInstructions Operating Oven Air VentsOven Shelves Safety Instructions OperatingOven Light Replacement Instructions Installation InstructionsRead these instructions completely and carefully Installation of the rangeOperating Instructions Must Never be Less than 24 Inches 36 ⁄ ± 1⁄4 28 1⁄4 to46 3⁄8 Location Provide Adequate Gas Supply Operating InstructionsConnect the Range to Gas Gas Pipe and Electrical Outlet Locations Instructions Operating Instructions Safety Instructions Troubleshooting Tips Installation Customer ServicePreferred Method Electrical Connections Electrical RequirementsExtension Cord Cautions Grounding IMPORTANT-Please read carefullyCheck Ignition of Surface Burners Instructions Operating Instructions SafetyElectric Disconnect Seal the OpeningsCheck Ignition of Oven Burner Instructions Troubleshooting Tips Customer ServiceSafety Instructions Operating Instructions Installation Quality of FlamesTo remove the oven bottom Leveling the RangeWhen All Hookups Are Completed Installing the Anti-Tip DeviceTroubleshooting Tips Customer Operating Instructions Safety Instructions Before You Call For Service…Problem Possible Causes What To Do Florescent top light Control signals afterOven temperature too Clock and timerBefore You Call For Service cont.… Unable to get Power outageDisplay goes blank Display flashesOperating Instructions Safety Instructions We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration What GE Will Not Cover GE Gas Range WarrantySafety Instructions Operating Instructions GE Will Replace, At No Charge To YouGE Answer Center Service Telephone Numbers