GE 164D3333P033 manual Using the clock and timer, Installation, To Set the Clock, To Set the Timer

Using the clock and timer.

The clock must be set for the automatic oven timing functions to work properly. The time of day cannot be changed during a timed baking or self-cleaning cycle.

To Set the Clock:

Make sure the clock is set to the	1	Press the CLOCK pad.
correct time of day.
		Press the + and – pads.
	2
		Press the CLOCK pad to start.
	3

Safety Information Operating Instructions

The timer is a minute timer only.

The timer does not control oven operations. The maximum setting on the timer is 9 hours and 55 minutes.

To Set the Timer:

1 Press the TIMER ON/OFF pad.

2 Press the + and – pads until the amount of time you want shows in the display. The timer will start automatically within a few seconds of releasing the pad.

Installation

To Reset the Timer:

If the display is still showing the time remaining, you may change it by pressing the the + and – pads until the time you want appears in the display.

If the remaining time is not in the display, recall the remaining time by pressing the TIMER ON/OFF pad and then pressing the the + and – pads until the new time you want shows in the display.

To Cancel the Timer:

Press the TIMER ON/OFF pad once. To cancel the timer press the TIMER ON/OFF pad again and hold for 4 seconds.

	End of Cycle Tones
or	Clear the tones by pressing the pad of the function you
	are using.

If you would like to remove the signal that beeps every 6 seconds, press and hold the CLEAR/OFF pad for 10 seconds.

To return the signal, press and hold the CLEAR/OFF pad
for 10 seconds.	21

Instructions Troubleshooting Tips Customer Service