GE 164D3333P033, 49-8779 manual How to Set the Oven for Convection Roasting when Using the Probe

Page 29
How to Set the Oven for Convection Roasting when Using the Probe

For best results when roasting large turkeys and roasts, we recommend using the probe included in the convection oven.

To change the oven temperature during the Convection Roast cycle, press the CONV. ROAST pad and then press the + or – pad to get the new desired temperature.

How to Set the Oven for Convection Roasting when Using the Probe

Do not lock the oven door with the latch during convection roasting. The latch is used for self-cleaning only.

The display will flash PROBE and the oven control will signal if the probe is inserted into the outlet, but the oven is not programmed for the probe.

 

Place the shelf in the lowest position (A). Insert the

1

 

probe into the meat.

 

Plug the probe into the outlet on the oven wall. Make

2

 

sure it is pushed all the way in. Close the oven door.

 

Press the PROBE pad.

3

 

Press the + or – pad until the desired internal probe

4

 

temperature is displayed.

 

Press the CONV. ROAST pad.

5

 

Press the + or – pad. The last oven set temperature

6

 

appears in the display. Continue pressing until the

desired oven temperature is displayed.

When the oven starts to heat, the words CONV ON and the roasting temperature you set will be in the display.

After a few seconds, the words LO PROBE will replace the roasting temperature in the display.

After the internal temperature of the meat reaches 100°F., the changing internal temperature will be shown in the display.

 

When the internal temperature of the meat reaches

7

 

the number you have set, the probe and the oven

turn off and the oven control signals. To stop the signal, press the CLEAR/OFF pad. Use hot pads to remove the probe from the food. Do not use tongs to pull on it—they might damage it.

CAUTION: To prevent possible burns, do not unplug the probe from the oven outlet until the oven has cooled. Do not store the probe in the oven.

NOTE:

■If the probe is removed from the food before the final temperature is reached, a tone will sound and the display will flash until the probe is removed from the oven.

■You will hear a fan while cooking with this feature. The fan will stop when the door is opened but the heat will not turn off.

■You can use the timer even though you cannot use

timed oven operations.

29

Safety Information Operating Instructions Installation Instructions Troubleshooting Tips Customer Service

Page 28 Page 30
Image 29
Page 28 Page 30
Contents GE Answer Center GE AppliancesOwner’s Manual JBP90 JBP95Congratulations You Are Now Part of the GE Family Staple sales slip or cancelled check hereWrite the model and serial numbers here # # drawerTroubleshooting Tips GE & You A Service PartnershipIf You Need Service Safety InformationIMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING IMPORTANT SAFETY NOTICEor using a ventilation fan or hood WARNING ANTI-TIP DEVICESafety Information Operating SAFETY PRECAUTIONSSafety Information Safety Information Operating Instructions Installation WHEN COOKING PORK…OVEN SELF-CLEANING OVEN HALOGEN/RADIANT SURFACE UNITS Instructions Safety InformationAlways turn the surface units off before removing cookware Instructions Safety Information Customer ServiceCleaning the glass cooktop section HALOGEN/RADIANT SURFACE UNITSSafety Using the surface unitsHow to Set Indicator LightsDual Surface Unit Switch Instructions Operating Instructions Safety InformationDifferences Between Halogen and Radiant Units Temperature LimiterStainless Steel Selecting types of cookwareAluminum Copper BottomTIMER ON/OFF Using the oven controlsSTOP TIME CLOCKAUTO SELF CLEAN Oven Control SettingsBROIL HI/LO Pad CONV. ROAST PadSafety Information Using the ovenD C B A Operating InstructionsSafety Information Operating Instructions Installation Instructions Preheating and Pan PlacementHow to Set the Oven for Broiling Aluminum FoilShelf Broiling guideFirst Side FoodInstallation Using the clock and timerTo Set the Timer To Reset the TimerHow to Set an Immediate Start and Automatic Stop Using the timed baking and roasting featuresMake sure the oven clock shows the correct time of day How to Set a Delay Start and Automatic StopInstructions Safety Using the probeInformation Do not store the probe in the ovenYou can use the timer even though you cannot use How to set the oven for roasting when using the probeInsert the probe into the meat timed oven operationsThe convection oven fan shuts off when the oven door is opened Using the convection ovenConvection Bake Convection RoastCookware for Convection Cooking Adapting Recipes…Paper and Plastic Metal and GlassTroubleshooting How to Set the Oven for Convection Baking or RoastingMulti-Shelf Baking How to Set the Oven for Convection Roasting when Using the Probe Meats Convection roasting guideBeef PorkUsing the timed features for convection baking Press the CLEAR/OFF pad to clear the display if Using the timed features for convection bakingAdjust the oven thermostat-Do it yourself To Adjust the ThermostatBefore a Clean Cycle Using the self-cleaning ovenPress the AUTO SELF CLEAN pad How to Set the Oven for CleaningAfter a Clean Cycle How to Delay the Start of Cleaningor any reason, be sure the anti-tip device is Care and cleaning of the rangetipping of the range and cause injury Control Panel and KnobsTo clean the inside of the door Lift-Off Oven DoorTo clean the outside of the door Do not lift the door by the handleOven Heating Elements Oven Light Replacementthe main fuse or circuit breaker panel disconnect the electrical power to the range atBroiler Pan & Grid Panel to Clean Under the RangeHow to Remove the Storage Drawer or Kick To remove the storage drawerSure Grip Handle Cooktop Surface LightTo remove To replaceDaily Cleaning Cleaning the glass cooktopFor heavy, burned-on soil National Parts CenterSpecial Care Installation Instructions for future use Installation of the rangeBEFORE BEGINNING INSTALLATION Before You Begininstall in either rear corner 1 Prepare the OpeningNot less than the width 30 ″When moving the range on this type of flooring, it should be installed on a 1/4″ thick sheet of plywood or similar material as follows Flooring Under the Range2 Prepare for Electrical Connection 3 Power Cord Strain Relief Installation Do NOT remove ground strap connection 4 3-Wire Power Cord InstallationConnector block Neutral terminal Ground strap Power cord After 5 4-Wire Power Cord InstallationBefore a Do not connect aluminum wire to the connector block 6 3-Wire Conduit InstallationNOTE ALUMINUM WIRING 7 4-Wire Conduit Installation 10 Final Check 8 Anti-Tip Bracket Installation9 Leveling the Range Troubleshooting Tips Before you call for service…Problem Customer ServiceSee the Using the the Broiling guide See the Adjust the ovenSee the Broiling guide and timer section See the Using the clockafter a clean cycle Oven not cleanExcessive smoking Oven door willTroubleshooting Tips Troubleshooting Tips GE Electric Range WarrantyWe Will Replace, At No Charge To You What GE Will Not CoverIn-Home Repair Service 800-GE-CARES Service Telephone NumbersTDD 800-TDD-GEAC Special Needs Service
Top Page Image Contents