GE 164D3333P033, 49-8779 manual Cooktop Surface Light, Sure Grip Handle, To remove, To replace

Cooktop Surface Light

When changing a cooktop light, do not touch the metal at the ends of the light.

The cooktop light is easily replaced with a fluorescent tube of the same wattage. Before changing the light, pull the plug to the range or disconnect the power at the main fuse or circuit breaker panel.

To remove:

	Lift the light cover by pulling the bottom edge
1
	toward you and then up.
	Place fingers on top near each end of the light.
2
	Roll the top of the light gently toward the front of
3
	the range and gently pull the light from the socket,

making sure it does not hit the light cover.

To replace:

	Place fingers on the top near each end of the light.
1
	Press the light into the slots until it snaps into place.
2
	Move light cover down and snap into place.
3

Sure Grip Handle

The sure grip door handle is easy to keep clean.

Soil will easily wash off with soap and water or a non-abrasive all- purpose cleaner.

Avoid using heavy-duty all-purpose cleaners and detergents as they may contain chemicals which might harm the sure grip handle.

Safety Information Operating Instructions Installation Instructions Troubleshooting Tips Customer Service

41