GE 164D3333P033 Care and cleaning of the range, or any reason, be sure the anti-tip device is

Page 37

Care and cleaning of the range.

Care and cleaning of the range.

		If your range is removed for cleaning, servicing
		or any reason, be sure the anti-tip device is
		re-engaged properly when the range is replaced.
		Failure to take this precaution could result in
		tipping of the range and cause injury.


		Control Panel and Knobs
		Control Panel and Knobs
		Clean up spatters with a damp cloth. Remove heavier
		soil with warm, soapy water.
		Do not use abrasives of any kind on the control panel.
		The control knobs may be removed for easier cleaning.
Pull the knob straight off the stem.		The control knobs may be removed for easier cleaning.

To remove a knob, pull it straight off the stem. Wash the knobs in soap and water but do not soak.

Oven Vent

The oven is vented through an opening at the rear of the cooktop.

Never cover the opening with aluminum foil or any other material.

Oven vent location

Painted Surfaces

Painted surfaces include the sides and the drawer front.

Clean these with soap and water or a vinegar and water solution.

Do not use commercial oven cleaners, cleaning powders, steel wool or harsh abrasives on any painted surface.

Safety Information Operating Instructions Installation Instructions Troubleshooting Tips Customer Service

37

Image 37

Contents GE Answer Center GE AppliancesOwner’s Manual JBP90 JBP95Congratulations You Are Now Part of the GE Family Staple sales slip or cancelled check hereWrite the model and serial numbers here # # drawerTroubleshooting Tips GE & You A Service PartnershipIf You Need Service Safety InformationIMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING IMPORTANT SAFETY NOTICEor using a ventilation fan or hood WARNING ANTI-TIP DEVICESafety Information Operating SAFETY PRECAUTIONSSafety Information Safety Information Operating Instructions Installation WHEN COOKING PORK…OVEN SELF-CLEANING OVEN HALOGEN/RADIANT SURFACE UNITS Instructions Safety InformationAlways turn the surface units off before removing cookware Instructions Safety Information Customer ServiceCleaning the glass cooktop section HALOGEN/RADIANT SURFACE UNITSSafety Using the surface unitsHow to Set Indicator LightsDual Surface Unit Switch Instructions Operating Instructions Safety InformationDifferences Between Halogen and Radiant Units Temperature LimiterStainless Steel Selecting types of cookwareAluminum Copper BottomTIMER ON/OFF Using the oven controlsSTOP TIME CLOCKAUTO SELF CLEAN Oven Control SettingsBROIL HI/LO Pad CONV. ROAST PadSafety Information Using the ovenD C B A Operating InstructionsSafety Information Operating Instructions Installation Instructions Preheating and Pan PlacementHow to Set the Oven for Broiling Aluminum FoilShelf Broiling guideFirst Side FoodInstallation Using the clock and timerTo Set the Timer To Reset the TimerHow to Set an Immediate Start and Automatic Stop Using the timed baking and roasting featuresMake sure the oven clock shows the correct time of day How to Set a Delay Start and Automatic StopInstructions Safety Using the probeInformation Do not store the probe in the ovenYou can use the timer even though you cannot use How to set the oven for roasting when using the probeInsert the probe into the meat timed oven operationsThe convection oven fan shuts off when the oven door is opened Using the convection ovenConvection Bake Convection RoastCookware for Convection Cooking Adapting Recipes…Paper and Plastic Metal and GlassMulti-Shelf Baking How to Set the Oven for Convection Baking or RoastingTroubleshooting How to Set the Oven for Convection Roasting when Using the Probe Meats Convection roasting guideBeef PorkUsing the timed features for convection baking Press the CLEAR/OFF pad to clear the display if Using the timed features for convection bakingAdjust the oven thermostat-Do it yourself To Adjust the ThermostatBefore a Clean Cycle Using the self-cleaning ovenPress the AUTO SELF CLEAN pad How to Set the Oven for CleaningAfter a Clean Cycle How to Delay the Start of Cleaningor any reason, be sure the anti-tip device is Care and cleaning of the rangetipping of the range and cause injury Control Panel and KnobsTo clean the inside of the door Lift-Off Oven DoorTo clean the outside of the door Do not lift the door by the handleOven Heating Elements Oven Light Replacementthe main fuse or circuit breaker panel disconnect the electrical power to the range atBroiler Pan & Grid Panel to Clean Under the RangeHow to Remove the Storage Drawer or Kick To remove the storage drawerSure Grip Handle Cooktop Surface LightTo remove To replaceDaily Cleaning Cleaning the glass cooktopFor heavy, burned-on soil National Parts CenterSpecial Care Installation Instructions for future use Installation of the rangeBEFORE BEGINNING INSTALLATION Before You Begininstall in either rear corner 1 Prepare the OpeningNot less than the width 30 ″2 Prepare for Electrical Connection Flooring Under the RangeWhen moving the range on this type of flooring, it should be installed on a 1/4″ thick sheet of plywood or similar material as follows 3 Power Cord Strain Relief Installation Connector block Neutral terminal Ground strap Power cord 4 3-Wire Power Cord InstallationDo NOT remove ground strap connection Before 5 4-Wire Power Cord InstallationAfter NOTE ALUMINUM WIRING 6 3-Wire Conduit Installationa Do not connect aluminum wire to the connector block 7 4-Wire Conduit Installation 9 Leveling the Range 8 Anti-Tip Bracket Installation10 Final Check Troubleshooting Tips Before you call for service…Problem Customer ServiceSee the Using the See the Broiling guide See the Adjust the oventhe Broiling guide and timer section See the Using the clockafter a clean cycle Oven not cleanExcessive smoking Oven door willTroubleshooting Tips Troubleshooting Tips GE Electric Range WarrantyWe Will Replace, At No Charge To You What GE Will Not CoverIn-Home Repair Service 800-GE-CARES Service Telephone NumbersTDD 800-TDD-GEAC Special Needs Service