Maytag W10430917A manual Electronic Oven Control

Page 7

ELECTRONIC OVEN CONTROL

B

AC

D

K

 

 

 

E

J

I

H

G

F

 

 

A. Bake

 

D. Timer

G. Clock

J. Cook & hold

B. Clock/timer display

 

E. Cancel

H. Delay

K. Broil

C. More (+)/less (-) buttons

F. Keep warm

I. Clean

 

Display

When power is supplied to the range or after a power interruption, the last clock time before power was interrupted will flash.

“BAKE” or “LOCK” may flash rapidly in the display to alert you if there is an error or problem. Press CANCEL and reset clock if needed.

When the oven is in use, the display shows the temperature and oven setting.

When the oven is not in use, the display shows the time of day.

When using the Timer, for settings of 1 to 59 minutes, the display will count down in minutes. For settings of 1 hour or more, the display will count down hours and minutes.

Cancel

The Cancel button stops any function except the Clock, Timer and Control Lock. When you press the Cancel button, the display will show the time of day, or the time remaining if the Timer is being used.

To Cancel the Clock Display:

If you do not want the time of day to display:

Press and hold CANCEL and CLOCK for 3 seconds. the time of day will disappear from the display.

When the clock display is canceled, press CLOCK to briefly display the time of day.

To Restore the Clock Display:

Press and hold CANCEL and CLOCK for 3 seconds. The time of day will reappear in the display.

Timer

The Timer can be set in hours or minutes up to 99 hours and 59 minutes, and counts down the set time.

The Timer can be used independently of any other oven function. It can also be set while another oven function is operating.

NOTE: The Timer does not start or stop the oven.

To Set:

1.Press TIMER.

“0:00” will appear in the display. The colon will flash.

Clock

The clock can be set to display time in a 12-hour or 24-hour format. The clock is set at the factory for the 12-hour format.

To recall the time of day when another time function is showing, press the Clock pad.

Clock time cannot be changed when the oven has been programmed for Delay Cook, Clean or Cook & Hold.

To Change the Clock to 24-hour Format:

1.Press and hold CANCEL and DELAY for 3 seconds.

2.Press MORE or LESS to select 24 hour.

To Set:

1.Press CLOCK. The colon will flash in the display.

2.Press MORE or LESS to set the time of day.

3.Press CLOCK or wait 4 seconds. The colon stops flashing.

2.Press MORE or LESS to set the length of time.

3.Press TIMER again or wait 4 seconds. Time will begin counting down.

When the set time ends, 1 long beep will sound.

To Cancel:

1.Press and hold TIMER for 3 seconds

OR

2.Press TIMER and set time to 0:00.

Control Lock

The Control Lock shuts down the control panel pads (buttons) to avoid unintended use of the oven(s).

The Control Lock is preset unlocked, but can be locked.

If the oven is currently in use, the controls cannot be locked.

To Lock/Unlock Control:

Press and hold CANCEL and COOK & HOLD for 3 seconds (Press the CANCEL pad first.) Repeat to unlock.

7

Image 7
Contents Electric Range Table of Contents Anti-Tip Bracket Range SafetyImportant Safety Instructions Ceramic Glass Hot Surface Indicator LightCooktop USE Cooktop ControlsHome Canning Cookware CharacteristicsCookware Electronic Oven Control Positioning Racks and Bakeware Oven Temperature ControlOven USE Aluminum FoilBakeware BakewareOven Vent BakingKeep Warm Cook & HoldBroiling Food Rack Approximate Position Automatic Shutoff/Sabbath ModeBroiling Chart To BroilRange Care Self-Cleaning Cycle on some modelsExterior Porcelain Enamel Surfaces General CleaningTo Delay Start Self-Clean To Stop Self-Clean AnytimeOven Light Storage Drawer TroubleshootingOven Door U.S.A Assistance or ServiceCanada This limited warranty does not cover Maytag Major Appliance WarrantyLimited Warranty Items Excluded from WarrantyLa bride antibasculement Sécurité DE LA CuisinièreConservez CES Instructions Pour les cuisinières avec programme d’autonettoyage Témoin lumineux de surface chaude Commandes de la table de cuissonRéglage Utilisation Recommandée High Utilisation DE LA Table DE CuissonVitrocéramique Ustensile Caractéristiques Ustensiles de cuissonHorloge Commande Électronique DU FourCancel annulation AfficheurAjustement du calibrage de la température du four Verrouillage des commandesUtilisation DU Four Papier d’aluminiumUstensiles DE Cuisson De cuissonUstensiles de cuisson au four GrillesCuisson au four Évent du fourCuisson et maintien au chaud Cuisson au gril Maintien au chaudCuisson au gril UtilisationTableau DE Cuisson AU Gril Arrêt automatique/Mode SabbatAliment Position Durée DE LA Approximative Grille Programme d’autonettoyage sur certains modèles Entretien DE LA CuisinièreSurfaces Externes EN Émail Vitrifié Nettoyage généralPour différer lautonettoyage Pour arrêter le programme dautonettoyage à tout momentCavité DU Four Boutons DE Commande DE LA Table DE CuissonTableau DE Commande Extérieur DE LA Porte DU FourTiroir de remisage DépannageLampe du four Porte du fourLafficheur indique des messages Le four ne fonctionne pasLa température du four est trop élevée ou trop basse Les témoins lumineux du four clignotentAux États-Unis Assistance OU ServiceAu Canada La présente garantie limitée ne couvre pas Articles Exclus DE LA GarantiePage Page Page 2012 W10430917A