Amana 8113P550-60 manual Timer, Locking the Control, Fault Codes

Page 9

Oven Cooking

To cancel the Clock display:

If you do not want the time of day to display:

Press and hold the Cancel and Clock pads for three sec- onds. The time of day will disappear from the display

When the clock display is canceled, press the Clock pad to briefly display the time of day.

To restore the Clock display:

Press and hold the Cancel and Clock pads for three seconds. The time of day will reappear in the display.

Timer

The timer can be set from one minute (0:01) up to 99 hours and 59 minutes (99:59).

The timer can be used independently of any other oven activity. It can also be set while another oven function is operating.

The timer does not control the oven. It only controls a beeper.

To set the Timer:

1. Press the Timer pad.

• 0:00 lights in the display.

• The colon will flash.

2.Press the ▲ or ▼ pad until the correct time appears in the display.

•The colon will continue to flash.

3.Press Timer pad again or wait four seconds.

•The colon continues flashing and the time begins counting down.

•The last minute of the timer countdown will be displayed as seconds.

4.At the end of the set time, one long beep will sound.

To cancel the Timer:

1.Press and hold the Timer pad for three seconds.

OR

2.Press the Timer pad and set the time to 0:00.

Locking the Control

The touchpad controls and can be locked for safety, cleaning, or to prevent unwanted use. They will not function when locked.

If the oven is currently in use, the controls cannot be locked.

The current time of day will remain in the display when the controls are locked.

To lock:

Press and hold the Cancel and Cook &

Hold pads for three seconds. (Press the

Cancel pad first.)

To unlock:

Press and hold the Cancel and Cook & Hold pads for three seconds. (Press the Cancel pad first.)

Fault Codes

BAKE or LOCK may flash rapidly in the display to alert you if there is an error or a problem. If BAKE or LOCK flash in the display, press Cancel pad. If BAKE or LOCK continue to flash, disconnect power to the appliance. Wait a few minutes, and then reconnect power. If the flashing still continues, disconnect power to the appliance and call an authorized servicer.

8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Maintenance 19-20 Care & Cleaning 16-18Troubleshooting 21-22 Warranty & Service Electric Slide-In Smoothtop Easy Touch ControlInstructions Recognize Safety Symbols, Words, LabelsTo Prevent Fire or Smoke Damage Case of FireChild Safety Important Safety InstructionsCooking Safety Utensil SafetyImportant Safety Notice and Warning Self-Clean OvenCleaning Safety CooktopSuggested Heat Settings Setting the ControlsSurface Controls After cooking, turn knob to OFF. Remove panTips to Protect Smoothtop Surface Smoothtop SurfaceCanning and Oversize Cookware Cookware RecommendationsTo Prevent Other Damage Flat Pan TestsOven Cooking Using the TouchpadsControl Panel ClockTimer Fault CodesLocking the Control Cook & Hold BakingBaking Differences Between Your Old and New Oven Baking NotesDelay Cook & Hold Favorite Keep WarmChanging Temp F/C Keep Warm NotesBroiling Broiling ChartBroil Notes Rack Total Foods PositionAutomatic Shut-Off/Sabbath Mode Adjusting the Oven TemperatureSabbath Mode Notes Oven Vent Oven FanOven Light Oven BottomBefore Self-Cleaning To set Self-CleanTo Delay a Self-Clean Cycle After Self-Cleaning During the Self-Clean CycleCare & Cleaning Cleaning ProceduresPart Procedure Glass FirstMovement, then wipe off excess oil Stainless SteelOven Door MaintenanceOven Window Oven Light style varies by modelStorage Drawer Leveling LegsProblem Solution TroubleshootingTo the self-clean cycle Word is not displayedContinue to run after use until the oven cools Off. This is normalWarranty Warranty & ServiceWhat is Not Covered By These Warranties If You Need Service29-31 25-2832-40 41-44Les instructions de sécurité importantes et les paragraphes Pour éviter un incendie ou des dommages par la fuméeSécurité pour les enfants En cas d’incendieFamiliarisation avec l’appareil Cuisson et sécuritéTable de cuisson Ustensiles et sécuritéFriteuses Hottes d’extractionAvertissement et avis important pour la sécurité Four autonettoyantConserver ces instructions pour consultation ultérieure Nettoyer uniquement les pièces mentionnées dans ce guideRéglage des commandes Boutons de commandeCuisson sur la surface Suggestions de réglageConseils de protection de la surface à dessus lisse Surface à dessus lisseUstensiles de grande taille et pour les conserves Recommandations sur les ustensilesPour éviter d’autres dommages Tests pour vérifier si les ustensiles ont un fond platCuisson dans le four Tableau de commandeUtilisation des touches HorlogeVerrouillage des commandes MinuterieCodes d’anomalie Cuisson et maintien Cuisson couranteRemarques sur la cuisson courante au four Différences de cuisson entre l’ancien four et le nouveauCuisson et maintien différée Remarques sur la fonction maintien au chaud Maintien au chaudProgrammation du maintien au chaud Annulation du maintien au chaudRemarques sur la cuisson au gril Cuisson au grilTableau de cuisson au gril Position Degré DE Temps DE Cuisson AlimentsRemarques sur le mode sabbat Arrêt automatique Mode sabbatAnnulation du mode sabbat Programmer le four pour une cuisson courante voirAjustement de la température du four Changement de la température F/CFavori Évent du four Ventilateur du fourÉclairage du four Sole du fourAvant l’autonettoyage NettoyageProgrammation de l’autonettoyage Démarrage différé d’un cycle d’autonettoyageAprès le cycle d’autonettoyage Pendant le cycle d’autonettoyageRemarques Pièce Nettoyage Méthodes de nettoyageVaporisant d’abord sur un linge ’excédentPorte Porte du four EntretienLampe du four Hublot du fourPieds de réglage de l’aplomb Tiroir de remisageDépose Recherche des pannes Problème SolutionNettoyage recommandés. Voir Les commandes et la porte sont peut-être verrouillées. VoirLa porte du four ne se déverrouille Pas après l’autonettoyageGarantie et service après-vente Garantie Ne sont pas couverts par ces garantiesSi vous avez besoin d’aide 51-54 Instrucciones Importantes55-57 58-66Para Evitar un Incendio o Daño Causado por el Humo Fecha de CompraCanadá Seguridad para los Niños En Caso de IncendioInstrucciones Generales Seguridad al CocinarSeguridad sobre el Uso de Utensilios CubiertaOllas Freidoras Campanas de VentilaciónHorno Autolimpiante Seguridad en la LimpiezaAviso y Advertencia Importante Sobre Seguridad Conserve estas Instrucciones para Referencia FuturaControles Superiores Cocinando en la EstufaProgramación de los Controles Ajustes de calor sugeridosConsejos para proteger la cubierta lisa Cubiertas LisasUtensilios para preparar conservas y de tamaños grandes Recomendaciones sobre los utensiliosPara evitar otros daños Prueba de las Ollas PlanasPanel de Control Cocinando en el HornoUso de las Teclas ‘Clock’ RelojCódigos de Errores ‘Timer’ TemporizadorBloqueo de los Controles ‘Bake’ Horneado ‘Cook & Hold’ Cocción yNotas sobre Horneado Mantener CalientePara cancelar ‘Delay Cook & Hold’ Cocción yMantener Caliente Diferido Después de una hora en ‘HOLD WARM’ Mantener Caliente‘Keep Warm’ Mantener Caliente Para cancelar ‘Keep Warm’Notas sobre ‘Keep Warm’ Para programar ‘Keep Warm’Notas Sobre Asado a la Parrilla ‘Broiling’ Asar a la ParrillaTabla de Asar a la Parrilla Posicion DE Termino DE Tiempo Total DE AlimentosPara cancelar el Modo Sabático Para cancelar ‘Bake’ cuando el Modo Sabático está activoCierre Automático Modo Sabático Notas Sobre el Modo SabáticoAjuste de la temperatura del horno ‘Favorite’ FavoritoCambio de la temperatura de F/C Respiradero del Horno Ventilador del hornoPanel Inferior del Horno Posiciones de la ParrillaAntes de la Autolimpieza Para programar ‘Self-Clean’ AutolimpiezaPara diferir un ciclo de autolimpieza Limpie el marco del horno, el marco deDespués del ciclo de autolimpieza Durante el ciclo de autolimpiezaNotas Pieza Procedimiento DE Limpieza Procedimientos de LimpiezaCuidado y Limpieza Puerta del Horno MantenimientoLuz del Horno Ventana del HornoGaveta de Almacenamiento Tornillos NiveladoresLocalización y Solución de Averías Problema SoluciónMarcas de metal Códigos de ErroresCrema para Limpieza de Cubiertas. Ver pág Manchas y estrías marronesGarantía Garantía y ServicioLo que no cubren estas garantías Si necesita servicio

8113P550-60 specifications

The Amana 8113P550-60 is a high-performance gas furnace that exemplifies advanced engineering and energy efficiency for residential heating. With its robust design and cutting-edge technologies, it has become a popular choice for homeowners seeking reliability and comfort in colder climates.

One of the standout features of the Amana 8113P550-60 is its variable-speed blower motor. This innovative technology enhances the system's efficiency and maintains consistent temperature levels throughout the home. By adjusting the speed based on the heating demand, the blower motor not only optimizes comfort but also minimizes energy consumption, making it an environmentally-friendly choice.

Additionally, this furnace is equipped with a multi-position design, allowing for flexible installation options. Whether the furnace needs to be located in the attic, crawl space, or a closet, the Amana 8113P550-60 can adapt to various spaces, ensuring that homeowners have greater versatility during installation.

The furnace boasts a high AFUE (Annual Fuel Utilization Efficiency) rating, indicating that a significant portion of fuel is converted into usable heat. This efficiency translates to lower utility bills and a smaller carbon footprint, aligning with the growing trend of eco-conscious consumer choices.

Another highlight of the Amana 8113P550-60 is its reliaable two-stage heating system. This feature allows the furnace to operate at lower capacity during milder temperatures, reducing energy usage while still keeping the home warm. On colder days, it can ramp up to provide additional heat, ensuring consistent comfort regardless of weather conditions.

In terms of safety and durability, the Amana 8113P550-60 is designed with a durable heat exchanger made from high-quality materials, enhancing its lifespan and reliability. It also includes a robust warranty, further emphasizing the manufacturer's commitment to quality and customer satisfaction.

Finally, the inclusion of advanced control systems allows homeowners to monitor and adjust settings conveniently. This adaptability provides an additional layer of energy savings, as users can establish heating schedules and respond to changing needs.

In summary, the Amana 8113P550-60 gas furnace combines impressive efficiency with innovative technologies, ensuring a reliable heating solution while keeping costs manageable and comfort high. Its variable-speed blower, flexible installation options, and two-stage heating system make it an excellent investment for any homeowner looking to enhance their indoor climate.
Top Page Image Contents