Settings for recording
Checking the external input
Before you begin, go to “Song settings” (☞ page 7 of this manual) and select an audio track (AT1 for this example).
1Access the Sequencer mode P1 tab 5 page (ATrkRec).
2
3 
6 4 1
2Select the Input Select item.
If you are recording from an analog device such as a guitar connected to the ANALOG IN 1 or 2 jack, select Analog.
Input from the ANALOG IN 1 jack will be recorded on audio track 1 or 3. Input from the ANALOG IN 2 jack will be recorded on audio track 2 or 4.
If you are recording from a digital device such as a DAT connected to the S/P DIF connector, select Digital. In this case, make sure that the Global mode P2 System Clock setting is set to S/P DIF. If you are recording from a digital device, proceed to step 6 .
If a digital signal containing a copy inhibit flag is input, the display will indicate Copy Inhibit. The
When digitally recording from copyrighted audio material such as a com- mercial DAT tape, you must be sure to obtain permission. Otherwise, you must use
Input from the S/P DIF connector will be recorded with the left channel of the source on audio track 1 or 3, and the right channel on audio track 2 or 4.
It is not possible to record a sampler or CD with a sampling frequency other than 48 kHz via the S/P DIF connector. If you wish to record from such a sampler or CD, use the ANALOG 1 or 2 jacks.
8