Korg HDR-TRI manual Audition buttons, Audio Track, Location/Sound name, Audition Parameters

Page 43

Sequencer P5

within the song is not affected.

Here you can also modify the sound name that was recorded.

Select the audio event that you wish to trim, and press the Trim button. You will enter Trim mode, and the following dialog box will appear.

a

b

c

d

Audition buttons
Play To Point button
Play Through Point button	Cancel button	Execute button
Play From Point button	All Play/Stop button

Audition buttons

	Play To Point button	Playback from approximately 2 seconds before the edit point until
	Play To Point button	the edit point and then stop.
		the edit point and then stop.

	Play Through Point button	Playback approximately 4 seconds surrounding the edit point and
	Play Through Point button	then stop.
		then stop.

	Play From Point button	Playback from the edit point for approximately 2 seconds and then
	Play From Point button	stop.
		stop.

When you press the All Play/Stop button once, the audio event will playback from start to end, allowing you to check the result of your trim setting. During playback you can press the button once again to stop. This button can also be used to stop playback that was initiated by the three audition buttons at left.

To execute the Trim operation, press the Done button. To return to the previous tab page, press the Cancel button. If you press the Cancel button, your edits will be canceled, and you will return from this dialog box to the Audio Event Edit dialog box. However a sound name that you have edited here will not be canceled.

a: Audio Track

This displays the selected track (the track selected when you entered Trim mode).

b: Location/Sound name

This displays the location in the track of the audio event being trimmed, and the name of the sound used by that event. You can use the text edit button to edit the sound name.

c: Audition Parameters

•Speed [x1, x7/8, x6/8, x5/8, x4/8] lets you specify the playback speed. By adjusting the playback speed you can ﬁnd the appropriate trim points more accurately.

•If the Repeat box is checked, pressing an audition button will cause the audio event to be played back repeatedly. To stop playback, press the All Play/Stop button.

40

Image 43

Contents HDR-TRI Table of Contents Table of Contents About hard disk recording Features of the HDR-TRIAbout sound and audio events About hard disksOn the hard disk, set an ID number in the range Settings for recordingHard disk connections and settings Turn the power OFF for the Trinity and the hard disksSpecify the size 0-540 Mbyte of the ﬁler partition Formatting a hard diskPress the OK button to execute formatting Outputinput Connections for recordingTrack ﬁeld, select the audio tracks that you wish to record Song settingsChecking the external input Example of connected device Press the START/STOP key RecordingRecording an audio track Press the REC/WRITE keyCompare function Track setting, select AT3&4To stop recording, press the START/STOP key Playback Adjusting the pan or volume balance of the tracksPlaying back the tracks you recorded Recording mixer events Using auto punch-in recording to edit Using the rehearsal functionRe-recording Creating repetitions of the same phrase EditingTrack bouncing ping-pong recording Set Pan to R127 for audio tracks Access the P8 tab 1 page Master FXBouncing Midi tracks and audio tracks together Applying master effectsCreating a song in conjunction with the Midi sequencer Creating a song in conjunction with the Midi sequencerAccess the Sequencer mode P1 tab 5 page MixA1-4 When you ﬁnish recording, press the START/STOP keySaving song data to a hard disk Saving/loading recorded dataLoading data from a hard disk Execute the page menu command Load Selected Using a recorded sound more than once in the same .SNG ﬁleCreating different arrangements using the same vocal Using the same sound more than onceMenu 5c Tempo/Tempo ModeTempo Mode Audio Track RecMulti Rec 5e Meter/Metronome/Resolution/Multi Rec/Remove Data5i Input Select Analog, Digital 5f Take5g Take Number 5h Rehearsal∞ ...+18 dB 5j Input Level5l Audio Track Name Display +4 dBu, -10 dBu, -30 dBuMenu Command 5m Monitor Mode Select5D Rec HD Select 6h Pan Panpot Mix Audio Track6f EQ Equalizer 6g Send1/Send2 127When Solo is selected for two or more audio tracks 6i Volume 100...1276j Mix Audio Track Mode MANUAL/READ/MUTE/SOLO/WRITE When Solo is selected for one audio track6D Rec HD Select 6E Volume PairingPreference 7h Recording SetupAudio Track parameter Audio Track 5c Delay Samples/0...5 msEnd Measure 999 Audio Track Edit3i Start Measure/End Measure Start Measure 9993B Automation Edit Audition Start/Stop button Insert buttonDelete button Copy button3D Copy Audio Track 3C Erase Audio Track3E Erase Measure 3F Delete Measure Introduction Operation Parameters3G Insert Measure 3H Copy Measure 3I Move Measure Trim button 3J Audio Event EditTrimming an audio event Audition Parameters Audition buttonsAudio Track Location/Sound nameExecuting the trim operation Trim ParametersCopying an audio event Inserting an audio eventMoving an audio event Deleting an audio eventStart/stop audition 4j Audio Track Name Audio Track Name4I Move Measure 4F Delete Measure4G Insert Measure 4H Copy Measure1B Load Selected Load3B Rename Utility3C Copy 3H Wipe 3G FormatIntroduction Operation Parameters Appendix Audio Utility 4B Backup to DAT4C Restore from DAT 4E Disp Used Sound List 4D Copy with Sound4F Delete Unused Sound Disk P1 Appendix No unused sounds found Error in wiping mediumDisk not formatted Memory full. Audio track can’t play to the endSpeciﬁcations Godzilla Wants my Trinity